@op_pikachu, Yep, it might be a proxy config, which you may or may not be able to disable or bypass. You can also try using ssh/cli to change the https port to something other than 443. The best CLI...

@op_pikachu, can you ping the switch IP? If ping works... If you're using multiple VLAN, it could be the traffic is not on the VLAN with admin status set, or maybe it's unchecked. Or maybe an access...

Hi @op_pikachu, It sounds like the switch is missing the default gateway. Get the default gateway from one of the other hosts and try adding that IP for the "Next Hop" in the steps below... Go to L3...

Hi @JonnieBeGood, Unfortunitly, it doesn't look like the POE injectors you have will work. The ones you listed are passive but the EAP-615 Wall requires an active (802.3at or 802.3af) injector. If...

Hi @Deeps530, Can you provide more information regarding the device on the other end of the wire and the port's link speed setting on both ends? Often the SFP+ connectivity issues are related to...

Hi @jra11500, The 610 would work. These features are standard on this line of products. The only AP with a smaller form factor would be the wall mounted types like the EAP615-Wall if that's what you...