Hi @mmansion, almost the same happened to me on ER605 V2 with firmware 2.2.6 and controller version 5.15.8.2 - OpenVPN config had disappeared from controller and users were there but unassigned. The...

Hi @Clive_A, yes, you're right, 0.0.0.0/0 should include all - but it wasn't working some time ago. now I've tried it again and it works as expected. apparently has WireGuard corrected the bug. found...

Hi all, I had problem configuring WireGuard client on my Android 15 Pixel phone to use my internal DNS on my LAN. No problems on my Windows laptop. After long research I've found small notice...

Hi @CostinR1, WireGuard itself is quite tricky to configure properly, especially in site2site scenario, where you have to manually setup all the routing. Fortunately in client2site scenario the...

Hi @CostinR1, I see the problem: the Wireguard local IP and the peer's allowed IP must be in the same network range 192.168.0.235 is well outside of 192.168.0.244/30 the usable IP range for...

Hi @Vincent-TP, sorry.... I'm subscribed to beta software and firmware, so EAP FW was before the 1.5.3. The controller is updated at every new release. Unfortunately I can't say, when the settings...