@MrBrownman Deco E4" refers to the boxed package (e.g., 2-pack or 3-pack), while "E4R" is the specific model name of the individual unit I've only seen newer firmware for the V1/V2 model sorry.

kooba28 wrote @HelpFixDecoApp thanks for your feedback. Actually my issue is solved now. After update do 1.10.0 firmware i needed to again restart my modem, and it solved the problem. I was...

@kooba28 I've not seen that on my setup with X50s You could try the early release firmware from here: https://community.tp-link.com/en/home/forum/topic/861624 I've been running it since itvwas...

@ShujaK You have two choices here, you can either keep the Etisalat router/modem and setup the Deco in access point mode. You would then turn off the router wi-fi in the router settings. OR If you...

@Panman81 Interesting, if you click on Main Bedroom and Myles room what do they say they are connected to?

@Panman81 Usually. I've only seen that error occur when the link from the main deco to the ISP drops to 100Mb or lower, so its usually on the WAN port not the port that goes to the switch. When you...