Capobuf wrote Thanks a lot man! So i need to set the "input" port (ap) as tagged member of vlan 100 and 200. Set the "output" port for vip network as untagged member of vlan 100. And set the "output"...

The latest firmware is TP_PharOS_1.3.3_160705 and WPA2 should work out of the box. However, if you want to use WPA2-Enterprise with PEAP/MSCHAPV2 in client mode/AP client mode, there is a beta...

If HTTPS requests would be intercepted, the browser would throw an error to warn the user about a possible man-in-the-middle attack and would refuse to connect. HTTPS was designed to ensure that no...

Your picture shows it very clearly: the EAP is connected to the switch over a trunk carrying both VLAN's traffic, this means data packets including the VLAN ID. The switch then can separate and...

You separate traffic by assigning a second port on your switch (or router) to VLAN 100 and a third one to VLAN 200. For a sample setup of VLANs see the paragraph about Multiple SSIDs here:...

Just to be sure: did you have selected "indoor" for the distance setting on the WA7210 (menu "Wireless -> Distance Setting")? This should be selected if used indoor. Anyway, what you are experiencing...