ByteguyLV3Online
Following: 0Followers: 0
Forums/ WiFi
2020-12-10 17:04:29
Re:AP signal strength optimization
@Fae Worked on the problem yesterday. I will probably have to do a site inventory of the entire marina to get an adequate picture of the signal strength. The MikroTik CPE says it's working on 5GHz....
0HELPFULS
Forums/ WiFi
2020-12-08 20:56:36
Re:AP signal strength optimization
@Fae When I check MESH tab in the access points, the signal strength between APs is from 50dBm to 61dBm. I can upload screenshots of these. I've linked them to the lowest number available. I've had...
0HELPFULS
Forums/ WiFi
2020-12-05 18:57:29
AP signal strength optimization
Surveying the signal strength throughout the mesh, it appears to uniformly be about -70. I would think that it should be stronger. The other day I wandered around and found that at least 4 APs had...
0HELPFULS
Forums/ WiFi
2020-11-14 22:44:20
Re:Using an EAP 225-outdoor as an antenna for a user outside of the mesh
@R1D2 I found a solution to the problem. What I went with is a MikroTik Metal 52 ac. This unit acts as a CPE with an omnidirectional antenna that performs quite well. It can be mounted anywhere on...
0HELPFULS
Forums/ WiFi
2020-10-18 18:22:20
Re:Using an EAP 225-outdoor as an antenna for a user outside of the mesh
@R1D2 So far, everyone has been quite happy with the network. Only a few complain. One person remarked that they noticed people with iPhones had the most connectivity problems. He was wondering that...
0HELPFULS
Forums/ WiFi
2020-10-17 22:31:18
Re:Using an EAP 225-outdoor as an antenna for a user outside of the mesh
@R1D2 Still fighting the "I can't get a good wireless signal" battle. Some folks use a range extender, one guy bought his own EAP-225 and the marina folks said I could add it into the mesh. Another...
0HELPFULS
1567...