@HG_67- Hi, Thanks for the message. You could remove the old Mesh network first, then create a new mesh system, such as the following link: How to delete a network on the Deco app Thank you very much...

@MalusPumila Hi, it is ok to downgrade from 1.1.1 to 1.0.17 which needs to be implemented via firmware recovery.-How to Downgrade Deco. By the way, can you find the VPN server/client settings after...

@WJLeong Hi, yes, the device would still work over WiFi 6 standard when connecting to the satellite Deco X10. Is there any specific reason that you want to use E4 as the main Deco, instead of Deco...

@Eightball11854 Hi, As long as the Deco is connected to another Deco via an Ethernet cable, they should be able to establish the Ethernet Backhaul. For more details, please refer to General questions...

@Patryk_F Hi, I don't think it is related to the firmware. It is more like to be an IP conflict. It is suggested to check the IPV4 address/subnet mask+ IPV4 DNS server, and LAN IP address/subnet...

@JayD1984 Hi, did the PS connect to the Deco X50 by WiFi? - Did the portal authentication work when the PS connects to the Sky router directly? It is also suggested to set Deco X50 back to "wireless...