Dear @Wachako, I have tried to connect ap to client but I cant get wan connection. Idk what configuration to do. Refer to the FAQ below to troubleshoot the problem. How can I set up the AP + Client...

Dear @Outdoors123, So if you have multiple then yes the primary must be one connected to the LAN for internet but the client ones must have the ability. I see they are omni directional so by the...

Dear @alankelly, The more I think about it, the more I'm convinced that I actually need 4 CPE210's to connect all three buildings. Each building will have a managed switch (for phones) and an access...

Dear @Wachako, so basically modem > cpe210 #1 AP > cpe210 #2 Client > router. If your modem is a pure modem (works in bridge mode), I'm afraid that the setup above won't work. The CPE210 AP should...

Dear @PowerShot, I've got two CPE210 setup ~150ft apart sitting in the windows of two houses pointed directly at each other. The connection from the internet is 100Mbps down and 10Mbps up to the AP...

Dear @tekniking, You may refer to the following FAQ to do the firmware recovery. How to use firmware recovery on the Pharos products, https://www.tp-link.com/support/faq/2954/