Dear @Marc_NL, For example: it is possible to assign a different IP-range to a VLAN? VLAN 110: 192.168.110.0/24, VLAN 120: 192.168.120.0/24, etc. When I make IP-groups of the VLANs I can set any...

Dear @jhusker, See the above post for how the switches are setup. I then connected two servers to swith A as follows. Server 1 (Linux) 10gig -> Port A10 (Untagged VLAN 1, PVID 1, tagged VLAN 111) ->...

Dear @jhusker, We haven't received such feedback before. Could you please provide more info for further analysis? With the following setup: Switch A: T1700X-16TS (ports 13-16 are using SFP+ copper...

Dear @Xstreem, As you can see below thge PPPoE connection of the ISP router is still active and gets a public IP: 79.xx.xx.169 If I go on a computer connected to the second router and check what is...

Dear @JohanV, Please check the PVID settings. For your setup, you may set the PVID as below. Port1 & Port2: PVID=2; Port3 till Port8: PVID=4; Other ports: PVID=1. By the way, please check the IP...

Dear @JohanV, When port 1 is not connected to the ISP the I can manage the switch with the "Easy Smart Configuration Utility" but as soon as I connect port 1 to the ISP then I can not manage the...