Hi, this is our setup: - Controller OC200 - one Management-VLAN and one VLAN for each SSID in our Network - some EAP225 Outdoor and some EAP115 Until now we have Mesh not activated, all of our APs are

Hi! I have the TL-ER6020 configured with 2 WAN ports. While WAN Port 1 is my primary one using a VDSL connection, WAN port 2 is meant to be used as failover with a LTE-Modem. Load Balancing is disable

Hardware: T2600G-18TS & EdgeRouter ERX -SFP Multiple VLANs Question; Is it worth setting up MVR Snooping with a T2600G-18T switch connected (router on a stick mode) to an Edge Router and one trunk wit

Hello All. Wondering if anyone has run into issues with VPN on this router. I have this deployed on a site, and they have vpn enabled on the router. They have a L2TP server setup and they have created

Hi, I have an R600 VPN router at site A. I want to set things up so that a laptop connected at site B can tunnel into site A. Site A already has a DHCP server in place. Any ideas on how I can setup th

Router is configured for DHCP on VLAN ID 100 on port 15 which is connected to Switch 2 port 15. I assume I need to configure port 15 as tagged with PVID 100 and should be combined with port 13 what sh