Hello, I have set up a R600VPN router at a site. That site has two ISP lines. One is 5MBPS lease line and another is 50MBPS broadband line. Deafult load balancing is enabled. but in speed test I am no

Is it possible to have a second MSTP on the switch - currently port 7 (int-cost 100, ext-cost 100, port role=root port status=forwarding ) + port 8 (int-cost 400, ext-cost 400 port-role=alternate port

Previously I could access both of my WAN admin pages at 192.168.2.2 and 192.168.2.3, but now only 2.2 (Wan 1) is accessible and the other is comes back as Destination host unreachable when doing ping

Model : TL-ER5120 Hardware Version : V4 Firmware Version : 4.0.2 Build 20200313 Rel.52726 ISP : Multiple The router is set up to use 3 WAN connections, each Wan goes to a DSL or 4G Modem router prior

Hello, Just picked up the switch yesterday, and got it configured/set up during the day. It seems, however, that when my PC powered down the switch also shut itself off. My PC uses a Mellanox ConnectX

Hello, after looking at many switches because there was no network in a factory, I could see that ports 18 to 24 were failing in that switch, as if that module had failed. 1 to 17 works fine. Have you