Archer C1200 v2 management interface and Wifi dies after a little while.

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
1101112...

Archer C1200 v2 management interface and Wifi dies after a little while.

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
160 Reply
Re:Archer C1200 v2 management interface and Wifi dies after a little while.
2018-01-07 06:37:41
I've got hardware version 3(US) and have been running a new version of the firmware that I got from support about 9 days ago. It is running pretty much flawlessly. Contact support for a new firmware version if you are having these problems.
  0  
  0  
#102
Options
Re:Archer C1200 v2 management interface and Wifi dies after a little while.
2018-01-07 06:59:14

thuonghali wrote

you tried to restore and configuration again?you should create a backup file.


If I have the EU version will the US version also work?
On the official TP Link page there is no update for EU version yet...
  0  
  0  
#103
Options
Re:Archer C1200 v2 management interface and Wifi dies after a little while.
2018-01-07 07:05:17

polesoft wrote

I'm testing the new release from the official page and so far the router is working fine.
http://static.tp-link.com/2018/201801/20180104/Archer C1200(US)_V2_180103.zip


If I have the EU version will the US version also work?
On the official TP Link page there is no update for EU version yet...
  0  
  0  
#104
Options
Re:Archer C1200 v2 management interface and Wifi dies after a little while.
2018-01-07 15:02:22
I bought C1200 four days ago. First two days it was working great. Now I had to reboot it twice, yesterday and today.
Before I bought this router I googled it, but not enough.
I have that C1200 v2 EU version. I updated that beta version of 2.0.1 software. Tomorrow I will see that, if this software is working better.
Let's hope that release version of software will available soon.
  0  
  0  
#105
Options
Re:Archer C1200 v2 management interface and Wifi dies after a little while.
2018-01-07 18:27:52

salosa wrote


I have that C1200 v2 EU version. I updated that beta version of 2.0.1 software. Tomorrow I will see that, if this software is working better.
Let's hope that release version of software will available soon.


Where did you find that beta?

Wneh I try to update to the new US firmware I get an error... My router is v. 1
  0  
  0  
#106
Options
Re:Archer C1200 v2 management interface and Wifi dies after a little while.
2018-01-07 19:31:55
Here,

hhnn wrote

I have received the TP LINK support reply today.

Here are the beta versions for download:

The beta firmware for Archer C1200 hardware version 1 can be found here: http://support.tp-link.com/f/83ec721f22/?dl=1.

The beta firmware for Archer C1200 hardware version 2 can be found here: http://support.tp-link.com/f/afccc09878/?dl=1.

Regarding firmware upgrade procedure :
IMPORTANT: To prevent upgrade failures, please read the following before proceeding with the upgrade process
Please verify the hardware version of your device for the firmware version. Wrong firmware upgrade may damage your device and void the warranty. Normally V1.x=V1
Do NOT turn off the power during the upgrade process, as it may cause permanent damage to the product.
Do NOT upgrade the firmware through wireless connection unless there is no LAN/Ethernet port on the TP-link device.
  0  
  0  
#107
Options
Re:Archer C1200 v2 management interface and Wifi dies after a little while.
2018-01-08 16:32:33
I contact tplink tech support, they told me that there will be a official firmware for version 3.

TXPearl wrote

So what about V3? Is there a firmware update for V3 yet? Both V1 and V2 have official updates on the website, but nothing yet for V3.

If it's forthcoming very soon, I'll wait. Otherwise, I need to move on with my life and replace these (I have two C1200 V3s).
  0  
  0  
#108
Options
Re:Archer C1200 v2 management interface and Wifi dies after a little while.
2018-01-08 22:09:01

hhnn wrote

I have received the TP LINK support reply today.

Here are the beta versions for download:

The beta firmware for Archer C1200 hardware version 1 can be found here: http://support.tp-link.com/f/83ec721f22/?dl=1.



1) C1200 v1 with this firmware is pretty stable, no random reboots.
2) However, IPv6 is still a little quirky. I noticed after a couple of hours, no IPv6 incoming or outgoing connections could be made even though IPv6 PPPOE was still connected.
3) I used to be able to get about 5-10% faster speeds with my previous wireless router on 2.4Ghz.
4) The iOS Tether app is unable to discover the router.

Shall continue monitoring.
  0  
  0  
#109
Options
Re:Archer C1200 v2 management interface and Wifi dies after a little while.
2018-01-08 23:10:32

gulag wrote

1) C1200 v1 with this firmware is pretty stable, no random reboots.
2) However, IPv6 is still a little quirky. I noticed after a couple of hours, no IPv6 incoming or outgoing connections could be made even though IPv6 PPPOE was still connected.
3) I used to be able to get about 5-10% faster speeds with my previous wireless router on 2.4Ghz.
4) The iOS Tether app is unable to discover the router.

Shall continue monitoring.


I have problems with IPv6 also with that C1200 v2 beta software. Router doesn't get IPv6 address. Original (2.0) software it was working fine. But no need to reboot the router, yet.
  0  
  0  
#110
Options
Re:Archer C1200 v2 management interface and Wifi dies after a little while.
2018-01-09 07:34:32
I have the C1200 v1 router, but we just got new firmware and I've also lost my ipv6 connectivity. I don't get an address anymore with Comcast. The new firmware works fine, the old firmware worked fine, just no ipv6 anymore.
  0  
  0  
#111
Options