Archer CR500 Port Forwarding

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

Archer CR500 Port Forwarding

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
Archer CR500 Port Forwarding
Archer CR500 Port Forwarding
2017-11-14 08:49:06
Model :

Hardware Version :

Firmware Version :

ISP :

Please let me know if I did this right....it is still not working

I found the information on which port I needed on this website - http://www.fantasygrounds.com/forums/faq.php?faq=networking

"Fantasy grounds uses the TCP protocol on port 1802 for both originating (players) and listening (host/GM) network connections. This settings can be overridden using the "-p ####" flag on the command line (or shortcut) when launching Fantasy Grounds."
File:
Untitled.pngDownload
  0      
  0      
#1
Options
1 Reply
Re:Archer CR500 Port Forwarding
2017-11-24 16:44:35
Is the WAN IP a public one? If not, you need to open the same port for the router on the main router/gateway. Check the IP address, DNS, default gateway of your machine where Fantasy Grounds is. Another way is to set it as DMZ host. or contact the developer to get some advice.
  0  
  0  
#2
Options