@venomspawn 

If you log into the A7 and go to Network > DHCP Server do you see your devices listed there?

Mine is configured as an Access Point, so it does not have DHCP active.

@venomspawn 

Switch to router mode to see if the devices show connected either on the status screen or DHCP server. What result do you get, if you switch back to AP Mode, you still have the same issue? If possible, please provide a screenshot of what you see in AP Mode.

I am having a similar issue as the Printer Server is not able to connect to my printer after upgrading firmware to 1.0.11 Build 20190810 rel.50990.  Prior I had no problem connecting to the printer server and when logging into the router.  Now it the USB settings only show "-sharing access" when the printer is connected.

https://prnt.sc/p347uy

Here is the screenshot showing my disconnect and reconnect of the USB printer.

https://prnt.sc/p348m0

Any help is appreciated.

Kindintentions wrote

I am having a similar issue as the Printer Server is not able to connect to my printer after upgrading firmware to 1.0.11 Build 20190810 rel.50990.  Prior I had no problem connecting to the printer server and when logging into the router.  Now it the USB settings only show "-sharing access" when the printer is connected.

 

https://prnt.sc/p347uy

 

Here is the screenshot showing my disconnect and reconnect of the USB printer.

 

https://prnt.sc/p348m0

 

Any help is appreciated.

 

@Kindintentions 

The original issue is different from what you mentioned with the latest firmware. 

If you would like the print server menu, please downgrade to the previous version. With the latest version you will need to either connect the printer with a Ethernet cable or via Wi-Fi.