HS210 with 2- 150W Halogen Flood Lights

HS210 with 2- 150W Halogen Flood Lights
HS210 with 2- 150W Halogen Flood Lights
a week ago
Model: HS110-KIT
Hardware Version:
Firmware Version:

Is there any concern using the above combination? The specs say max draw is 5A. Two 150W should be drawing 2.5A but I'd like to be sure about this before I buy and instal. Also I really only need one switch hooked up to the 3-way setup right?

 

Thanks!

0
0
#1
Options
2 Replies
Re:HS210 with 2- 150W Halogen Flood Lights
a week ago

@Jim-A 

 

The amperage seems to be in spec, but the initial draw may spike above the supported amperage. You do only need one HS210.

0
0
#2
Options
Re:HS210 with 2- 150W Halogen Flood Lights
Monday

@Tony I'm looking for a yes or no from TP-Link on this. I searched for initial Amp draw on halogen lights but didn't find anything useful and I don't have the right kind of tester to check the actual amps reading when they are turned on. Certainly there must be a recommendation for this?

 

Thanks,

0
0
#3
Options