Archer MR200 - Problem with port forwarding

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

Archer MR200 - Problem with port forwarding

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
Archer MR200 - Problem with port forwarding
Archer MR200 - Problem with port forwarding
2020-04-03 09:28:27
Model: Archer MR200  
Hardware Version: V4
Firmware Version: 1.9.0 0.9.1 v0001.0 Build 190307 Rel.54196n

Hello

I have set multiple rules port forwarding rules on my Archer MR200 (NAT forwarding -> Virtual Servers) and they are working. Today I tried to add another one but this rule doesnt seems to work.

 

For example I have rule nr. 10 which redirect port 16676 to port 80 of my IP camera. This works.

Now I added rule nr. 13 which should redirect port 16679 to port 80 of my TL-WR802N. When I try to access this device via http://ARCHER_WAN_IP:16679 the connection just timed out. Interestingly if I switch target IP addresses in ruleset ( so now IP camera is on 13 and TL-WR802N on 10th position) I can connect to TL-WR802N but not to IP Cam.

 

It seems that rules after 11th or 12th are beeing ignored? No idea why. Can someone help me with this please?

 

  0      
  0      
#1
Options
3 Reply
Re:Archer MR200 - Problem with port forwarding
2020-04-03 17:33:08

@Demolice 

 

What if you change the HTTP port on the 13th slot to something like 100 rather then 80. Very odd how the issue stays with the slot.

  0  
  0  
#2
Options
Re:Archer MR200 - Problem with port forwarding
2020-04-06 06:00:58

@Tony 

 

Hi 

I tried ports 81, 8080, 33333 but it does not help

  0  
  0  
#3
Options
Re:Archer MR200 - Problem with port forwarding
2020-04-06 15:45:49

@Demolice 

 

I would recommend getting a hold of your local TP-Link support team: https://www.tp-link.com/cz/support/contact-technical-support/#LiveChat-Support

  0  
  0  
#4
Options