Firmware for TL-WPA4XXX, TP-PA4XXX AV500/AV600 adapters QCA7420-1.5.0.0026
For TL-WPA4530 TL-WPA4230P TL-WPA4226T TL-WPA4226 TL-WPA4220T TL-WPA4220 TL-WPA4221 TL-WPA4220 TL-PA4020PT TL-PA4022P TL-PA4020P TL-PA4016P TL-PA4020 TL-PA4010P
This firmware is with 500Mbit and 600Mbit Adapters compatible of every manufacturer with QCA7420 chip regardless of hardware version.
Update via tpPLC_Utility for Windows or Mac with PIB file of previous firmware update.
FW-QCA7420-1.5.0.0026-02-CS-20200114.nvm
https://mega.nz/file/ocNDhYzK#xuSQXd-b6CzzfpSXaK7r5BV4i3pXmnstYMjZX5WEWHc
Changes to version 1.5.0.0021 are:
Stability increase
This is an official public available firmware.
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
I've got trouble with install this FW
One 4010 updated OK
But another 4010p (v2) fails all the time - I'm getting "Update failed" on both devices
I've found out that the FW filesize differs
current MAC-7420-v1.1.0-01-X-FINAL.nvm is 337kB
latest FW-QCA7420-1.5.0.0026-02-CS-20200114.nvm 390kB
That may be a reason? But what will means? Seems that it's same chipset.
EDIT:
I've tried to flash FW using plctool and i get some more more info :
Minor Version Mismatch (0x48): Device refused request
But still can't flash
- Copy Link
- Report Inappropriate Content
@PowerlineFW Please can you or someone else re-upload the latest firmware? Thank you.
- Copy Link
- Report Inappropriate Content
@alnxx I successfully upgraded all the following Powerline adapters:
TL-PA4010P(UK) VER:5.0
TL-PA4010(UK) VER:3.0
TL-PA4020P(UK) VER:4.0
- Copy Link
- Report Inappropriate Content
@Fitzcarraldo Thanks for reply. I've got another 4010p v5.0 and updated with no problems, v2 still refuse to update itself so i think it's hardware related.
V5 seems to work way better on this update, however it's still no perfect - while data transfer and ping are fine, dns/dhcp requests are timing out sometimes
But it's still big improvement.
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
@Fitzcarraldo As a complete noob (but willing to learn) I tried to do what you did. But I just don't know how to compile the Github stuff. I tried with ant, mingw and eclipse but nothing works for me. Why can't they just include a bunch of binaries for poorly skilled people like me?
Can anyone show me the right commandline stuff to do?
Or provide me an executable files for Win10 to get the pib file.
Or even better, what I need is the bip file for my TP-TL-WPA4230P.
Any help is appreciated. Or a shoulder to cry on.
- Copy Link
- Report Inappropriate Content
@Martijn69 Use the PIB from this firmware:
https://www.tp-link.com/us/support/download/tl-pa4010-kit/#Firmware
All other PIBs didn't work for me, but this one works with the NVM from the original post.
- Copy Link
- Report Inappropriate Content
@PowerlineFW What exactly is the expected result of this procedure?
- Copy Link
- Report Inappropriate Content
@PowerlineFW No more newer updates?
- Copy Link
- Report Inappropriate Content
Hi all.
I could successfully upgrade my old TP-WPA4230P Kit adapters with the new firmware MAC-QCA7420-1.5.0.26-02-20200114-CS
Model : TL-WPA4230P Kit (TL-PA4020P & TL-WPA4230P)
Hardware Version : V1
OLD Firmware Version : MAC-QCA7420-1.1.0.844-01-20120919-FINAL
NEW Firmware Version : MAC-QCA7420-1.5.0.26-02-20200114-CS
I did the upgrade with the open PLC utils which could be successfully compiled on a Raspberry PI.
Also I had to use the PIB provided by Burggraben (Post #18) from the TL-PA4010-Kit.
NOTE: read also the great article: Updating the Powerline adapters in my home network from Fitzcarraldo !!!
(https://fitzcarraldoblog.wordpress.com/2020/07/22/updating-the-powerline-adapters-in-my-home-network/)
The following commands did the update and the the status confirmation:
---
Before Upgrade:
$ sudo ./plcstat -t -i eth0
P/L NET TEI ------ MAC ------ ------ BDA ------ TX RX CHIPSET FIRMWARE
LOC STA 002 30:B5:C2:XX:XX:XX B8:27:EB:XX:XX:XX n/a n/a QCA7420 MAC-QCA7420-1.1.0.844-01-20120919-FINAL
REM CCO 001 30:B5:C2:XX:XX:XX 30:B5:C2:XX:XX:XX 120 064 QCA7420 MAC-QCA7420-1.1.0.844-01-20120919-FINAL
Upgrade:
$ sudo ./plctool -i eth0 -P /home/pi/PLC/firmware-tp/QCA7420-WallAdapter-HomePlugAV_CE-ClassB_us_401030.pib -N /home/pi/PLC/firmware-tp/FW-QCA7420-1.5.0.0026-02-CS-20200114.nvm -R 30:B5:C2:XX:XX:XX
$ sudo ./plctool -i eth0 -P /home/pi/PLC/firmware-tp/QCA7420-WallAdapter-HomePlugAV_CE-ClassB_us_401030.pib -N /home/pi/PLC/firmware-tp/FW-QCA7420-1.5.0.0026-02-CS-20200114.nvm -R 30:B5:C2:XX:XX:XX
PLCSTAT shows this after both adapters were upgraded:
$ sudo ./plcstat -t -i eth0
P/L NET TEI ------ MAC ------ ------ BDA ------ TX RX CHIPSET FIRMWARE
LOC STA 005 30:B5:C2:XX:XX:XX B8:27:EB:XX:XX:XX n/a n/a QCA7420 MAC-QCA7420-1.5.0.26-02-20200114-CS
REM CCO 001 30:B5:C2:XX:XX:XX 30:B5:C2:XX:XX:XX 068 069 QCA7420 MAC-QCA7420-1.5.0.26-02-20200114-CS
---
@PowerlineFW Special thanks for this great post.
@TP-Link The adapter are working fine - even after nearly 7 years of operation. So, looks like this is a stable hardware. But as a customer related company which is concerned about user satisfaction you have to provide updates also for legacy products. As we see it's not much effort to provide updates! Be aware that the gain of updates is a much higher trust from customers.
- Copy Link
- Report Inappropriate Content
Information
Helpful: 9
Views: 23246
Replies: 21