No Username Prompt, Password Only for Gigabit Ethernet Easy Smart Switch

No Username Prompt, Password Only for Gigabit Ethernet Easy Smart Switch
No Username Prompt, Password Only for Gigabit Ethernet Easy Smart Switch
2020-05-26 02:55:59 - last edited 2020-06-15 00:59:59
Hardware Version:
Firmware Version:

I recently set up my TL-SG1016DE and it's working well.  The install guide says that I should be able to login into and manage the switch via 192.168.0.1 with a username/password combo of admin/admin.

 

However, as you can see from the attached image, there is no username prompt, only password.  Providing just "admin" for the password does not work.

 

Thank you

0
0
#1
Options
1 Accepted Solution
Re:No Username Prompt, Password Only for Gigabit Ethernet Easy Smart Switch-Solution
2020-05-26 22:20:20 - last edited 2020-06-15 00:59:59

@miguelbeach 

 

The Archer A7 or the router is what you are logging into and not the router.


If you use the utility are you able to get to the switch? Link

Best Solution
0
0
#2
Options
2 Replies
Re:No Username Prompt, Password Only for Gigabit Ethernet Easy Smart Switch-Solution
2020-05-26 22:20:20 - last edited 2020-06-15 00:59:59

@miguelbeach 

 

The Archer A7 or the router is what you are logging into and not the router.


If you use the utility are you able to get to the switch? Link

Best Solution
0
0
#2
Options
Re:No Username Prompt, Password Only for Gigabit Ethernet Easy Smart Switch
2020-06-15 01:01:09

@Tony thank you.  My mistake - you are correct, that was the wifi router admin login.

0
0
#3
Options