3-way HS210 smart switch with in a 4-way configuration

3-way HS210 smart switch with in a 4-way configuration
3-way HS210 smart switch with in a 4-way configuration
2020-06-07 21:49:03

I have 2 hs210 switches at the beginning and end of a series of switches, with a dumb switch in the middle, with 2 black and 2 red wires and 1 ground. If i turn off the middle switch it cuts power to the last hs210. So you cant use 2 3-way switches in a 4way setup? Both hs210s are setup as a pair but if the middle switch is turned off, the light will not work.

 

First Switch

 

 

Second Switch

 

Third Switch

0
0
#1
Options
2 Replies
Re:3-way HS210 smart switch with in a 4-way configuration
2020-06-08 21:36:07

@NorCalRicky I have a four way setup. At first I installed two HS210 switches but realized only one is required. So I have standard three way, a standard four-way and an HS210 on the circuit and they all work (although the HS210 does not detect when I turn on the light using the four way switch. So it is possible you just have to get the wires right. 
 

I have a similar issue with a three way setup. When I replaced the one or the two HS210 switches with a standard three way switch that standard switch turns off power to the HS210. I need to figure out the correct wiring. 

0
0
#2
Options
Re:3-way HS210 smart switch with in a 4-way configuration
2020-06-11 18:33:51 - last edited 2020-06-11 18:34:27

@MilesO The wiring on a 4 way switch should be simple. it would be the middle switch with 2 hs210 on both ends of the circuit. Wiring a 4 way light switch

0
0
#3
Options