Home Network Community > Wi-Fi Routers > Archer c7 ver 2.0 cannot log in after changing IP
< Wi-Fi Routers

Archer c7 ver 2.0 cannot log in after changing IP

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

Archer c7 ver 2.0 cannot log in after changing IP

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
Archer c7 ver 2.0 cannot log in after changing IP
Archer c7 ver 2.0 cannot log in after changing IP
2020-08-11 11:54:46 - last edited 2020-08-11 11:56:53
Model: Archer C7  
Hardware Version: V2
Firmware Version:

Archer A7 ver 5 main router.

Ethernet wired to LAN port on Archer C7 to use as Access Point.

 

On C7

All wireless connections working

All Ethernet wired connections working

 

A7 IP: 192.168.0.1

 

Changed C7 IP to

192 168.0.3

 

After changing the IP I could no longer log into the A7.

 

I can see it on wireless network scanner.  It's working but I wanted to change the SSID for use by network extender.

 

What did I do wrong?  Previously my Archer C9 bombed so I was trying to set up my LAN with a new A7.  The old C9-A7 system was working fine until the C9 crashed.

  0      
 
  0      
 
#1
Options
4 Reply
Re:Archer c7 ver 2.0 cannot log in after changing IP
2020-08-12 17:30:42

@wotnwabbit 

 

Make sure you turned off the DHCP server on the C7 since the A7 is the main router and that should only be running the DHCP server.

 

The subnet mask for both routers should be: 255.255.255.0

  0  
  0  
#2
Options
Re:Archer c7 ver 2.0 cannot log in after changing IP
2020-08-13 09:49:49

@Tony 

 

I know I did turn off DHCP on the C7.  I was following the video for this on the TP Link support page.

 

I cannot be positive about the 255.255.255.0, but since I think it was a default value, I didn't change it.

 

Thanks for trying to help me.

  0  
  0  
#3
Options
Re:Archer c7 ver 2.0 cannot log in after changing IP
2020-08-13 14:15:32

@wotnwabbit i am facing this same issue yesterday all through, i was in a hurry so i couldn't ask for any help here i had to just use my second router which the network was very slow, i had no option but to still use it that way. Thank for the swift reply given to the first person who just ask a question with the same problem i am facing. i belive the answer will go a long way to help me and others facing the same kinda issues. I will also make sure i write about the common problems faced by users and most of the quick solutions just like as the tp-link community support team provide on my tech and android apk blog to help reach out with solutions to blog audience too.  

I Still Remain myself Damtops, You humble guy, the Real Tech lover. To know more about me Do well to visit my tech blog https://damtops.com
  0  
  0  
#4
Options
Re:Archer c7 ver 2.0 cannot log in after changing IP
2020-11-04 08:30:55

Your settings?


A7 192.168.0.1 Subnet Mask 255.255.255.0 DHCP On

C7 192.168.0.3 Subnet Mask 255.255.255.0 DHCP Off

 

Have you tried rebooting the computer afterward? After changing the address of my C4000 from 192.168.0.1 to 192.168.1.1, I needed to reboot the computer for the browser to see the router. Before that, the router said to wait, did a countdown, and it would reconnect, but it didn't. This behavior is different from my Linksys and Western Digital routers, which would reconnect after a change in address without a computer reboot.

  0  
  0  
#6
Options

Information

Helpful: 0

Views: 740

Replies: 4

About Us
Press
Copyright © TP-Link USA Corporation. All rights reserved.