Tplink A6 2.4G is not working but 5G is stable

Tplink A6 2.4G is not working but 5G is stable
Tplink A6 2.4G is not working but 5G is stable
2020-08-29 15:32:25

I bought Archer A6. 2.4G is not at all working(0.25 mbps/ 30mbps) but 5g is good and stable. 
 

Tried to make suggested changes in channel and others. Firmware is updated(1.1.6)  too. 
 

kindly suggest if i should make any other settings. 
 

didnt expect this from a new router. 

0
0
#1
Options
1 Reply
Re:Tplink A6 2.4G is not working but 5G is stable
2020-08-29 23:00:36

@VJBenda 

 

I 'assume' you mean your only getting .25Mbps down on 2.4Ghz SSID out of the ISP's 30Mbps down? 5Ghz has no problems and gets 30Mbps down.

 

A simple test could be connect the 5Ghz device to the 2.4Ghz SSID and see what speed it gets. If it gets full speed, start looking at the device.

 

One thing to look at though would be the Security. Also MU-MIMO might need to be off?

0
0
#2
Options