Archer C9 - Upload speed cuts in half in wired mode
This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
Hi,
When I turn off the WiFi and use the modem through wired mode for my PS4, I get half the upload speed. My upload is 1 MB through WiFi, but when I only used the wired i get 500 Kb/s. Can anyone help why this happens?
Through wire, only my PS4 is connected to the modem.
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
@IrvSp YEs. The D/L Speed is okay. Unfortunately I still have a copper ADSL connection, so I usually shut down the WiFi, so that all upload speed of 1 MB is for the PS4.
Running checks It still only goes up to 0.5 which is quite strange. I have tried a different cable and the result is the same. The upload speeds on WiFi are around 0.8 is no one else is using the internet.
Could you tell me the QoS settings?
- Copy Link
- Report Inappropriate Content
WaleedKhan wrote
Could you tell me the QoS settings?
From the C9 V1 emulator, it looks like it is under Advanced, Bandwidth.Control. Two tabs on the left as well under it, Controls Settings and Rules List.
First make sure the proper speeds are set. I'll assume it is otherwise wired wouldn't work correctly. However there could be a RULE that impacts who gets what? First thing I'd do is under Bandwidth Control Settings is uncheck it and see if that fixes it? Same as QoS is on most routers. Help for that page:
--------------------
Bandwidth Control Settings Help
In this page you can disable or enable the Bandwidth Control feature. The Bandwidth Control Rules will work properly only when the Bandwidth Control feature is enabled.
- Enable Bandwidth Control - If enabled, the Bandwidth Control rules will take effect.
- Egress Bandwidth - The upload speed through the WAN port.
- Ingress Bandwidth - The download speed through the WAN port.
----------------------
- Copy Link
- Report Inappropriate Content
Information
Helpful: 0
Views: 916
Replies: 3
Voters 0
No one has voted for it yet.