Archer A20 slow speed, appears to be resetting?
My internet connection has been getting slow on me lately. Whenever it gets slow, I log in & reboot the cable modem (Cox) and my router. This usually works to speed things back up for awhile. Over the last couple days it's happened to me twice. I pay for Gigabit down (950Mb) and 35Mb up. When I ran speedtest earlier on my pc, I was getting 90Mb up & 0.46 down! Working from home, this is not cutting it for remote desktops. I switched my wire from running into the Archer A20, to run directly into the 2nd port on my cable modem & was immediately getting 931Mb down & 34Mb up!!! Reboot router, switch back to A20, my speeds get better at 625Mb down/28Mb up, which is servicable (but still curious about the drop).
When I look at the System Log (snippits below), it looks like when things really bog down, it's going through some sort of initialization/reboot every minute until I get sick up it (I'm assuming) and log in to reboot everything.
Any thoughts?
Thanks,
Ian
Once instance:
75 | 2021-01-18 17:11:57 |
Remote Management |
INFO |
[4191] Service stop |
76 | 2021-01-18 17:11:46 |
NAT |
INFO |
[3167] IPSEC ALG enabled |
77 | 2021-01-18 17:11:46 |
NAT |
INFO |
[3167] L2TP ALG enabled |
78 | 2021-01-18 17:11:46 |
NAT |
INFO |
[3167] PPTP ALG enabled |
79 | 2021-01-18 17:11:46 |
NAT |
INFO |
[3167] H323 ALG disabled |
80 | 2021-01-18 17:11:45 |
NAT |
INFO |
[3167] Initialization succeeded |
81 | 2021-01-18 17:11:45 |
NAT |
INFO |
[3167] Initialization succeeded |
82 | 2021-01-18 17:11:36 |
Led Controller |
INFO |
[1277] Start to run WAN1_OFF |
83 | 2021-01-18 17:11:36 |
Led Controller |
INFO |
[1277] Start to run WAN0_ON |
84 | 2021-01-18 17:11:36 |
Led Controller |
INFO |
[1277] Start to run LAN_ON |
85 | 2021-01-18 17:10:43 |
Led Controller |
INFO |
[1277] Start to run WAN1_OFF |
86 | 2021-01-18 17:10:43 |
Led Controller |
INFO |
[1277] Start to run WAN0_OFF |
87 | 2021-01-18 17:10:43 |
Led Controller |
INFO |
[1277] Start to run LAN_ON |
88 | 2021-01-18 17:10:43 |
NAT |
INFO |
[366] Initialization succeeded |
89 | 2021-01-18 17:10:42 |
NAT |
INFO |
[366] Initialization succeeded |
90 | 2021-01-18 05:01:30 |
Led Controller |
INFO |
[1277] Start to run WAN1_ON |
And another time:
25 | 2021-01-19 17:24:26 |
Remote Management |
INFO |
[4544] Service stop |
26 | 2021-01-19 17:24:15 |
NAT |
INFO |
[3060] IPSEC ALG enabled |
27 | 2021-01-19 17:24:15 |
NAT |
INFO |
[3060] L2TP ALG enabled |
28 | 2021-01-19 17:24:15 |
NAT |
INFO |
[3060] PPTP ALG enabled |
29 | 2021-01-19 17:24:15 |
NAT |
INFO |
[3060] H323 ALG disabled |
30 | 2021-01-19 17:24:13 |
NAT |
INFO |
[3060] Initialization succeeded |
31 | 2021-01-19 17:24:13 |
NAT |
INFO |
[3060] Initialization succeeded |
32 | 2021-01-19 17:24:04 |
Led Controller |
INFO |
[1277] Start to run WAN1_OFF |
33 | 2021-01-19 17:24:04 |
Led Controller |
INFO |
[1277] Start to run WAN0_ON |
34 | 2021-01-19 17:24:04 |
Led Controller |
INFO |
[1277] Start to run LAN_ON |
35 | 2021-01-19 17:23:11 |
NAT |
INFO |
[29655] Initialization succeeded |
36 | 2021-01-19 17:23:11 |
NAT |
INFO |
[29655] Initialization succeeded |
37 | 2021-01-19 17:23:10 |
Led Controller |
INFO |
[1277] Start to run WAN1_OFF |
38 | 2021-01-19 17:23:10 |
Led Controller |
INFO |
[1277] Start to run WAN0_OFF |
39 | 2021-01-19 17:23:10 |
Led Controller |
INFO |
[1277] Start to run LAN_ON |
40 | 2021-01-18 17:12:55 |
UPnP |
INFO |
[9635] Service start |