Tl-wpa7510 kit firmware upgrade

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
Tl-wpa7510 kit firmware upgrade
Tl-wpa7510 kit firmware upgrade
2021-02-09 16:37:08

I have just upgraded the WiFi part of the kit to enable air printing from a pc that is wired to the network in the same room. That bit now works. However, iPads that are connected by WiFi to the network that pass through a bit home hub then to the none WiFi part of the kit then on to the room where the printer is still do not see the printer ( which is an air printer ). Prior to fitting the top link kit using an old technicolour router ( now dead ) with dchp turned off as a pass through it worked flawlessly.  I presume the none WiFi part of the kit ta-pl7010 needs a different firmware but there does not seem to be one available. Is there a solution.

  0      
  0      
#1
Options
3 Reply
Re:Tl-wpa7510 kit firmware upgrade
2021-02-09 17:19:16
Quick correction the unit is a tl-pa7010
  0  
  0  
#2
Options
Re:Tl-wpa7510 kit firmware upgrade
2021-02-09 19:41:07

@Tunshill 

 

To clarify you have one TL-PA7010, and one TL-WPA7510?

  0  
  0  
#3
Options
Re:Tl-wpa7510 kit firmware upgrade
2021-02-13 20:57:35
Just look there: https://community.tp-link.com/us/home/forum/topic/249062
  0  
  0  
#4
Options