Deco M5 Guest Network

Deco M5 Guest Network
Deco M5 Guest Network
2021-04-02 09:20:30
Model: Deco M5
Hardware Version: V3
Firmware Version: 1.5.3 Build 20210203 Release 68223

My Deco M5 system is set at AP.  My NAS drives  are wired to the main deco. About 4 days ago, the NAS drives started showing as connected to the Guest Network. Why is this, please?  The Guest Network is diabled in Wi-Fi Settings.

0
0
#1
Options
2 Replies
Re:Deco M5 Guest Network
2021-04-06 18:16:23

@Slog 

 

If the Deco is set in AP Mode then it doesn't have any control over the routing so I would start with what the main Deco is wired to. You could also disconnect the Deco and plug that same Ethernet cable into the NAS to see if it shows the same thing.

0
0
#2
Options
Re:Deco M5 Guest Network
2021-04-07 07:59:25

@Tony  Thanks for your suggestions, but the question is why does the Deco 5 show devices as wired to its guest network, which is not possible? The guest network is surely just a wireless concept. I see on other threads that similar behaviour happens on other Deco devices.

 

0
0
#3
Options