Does Anyone has problem with Magic Jack connected to TP-Link AX1800 WiFi 6 Router (Archer AX21)
Hi, I recently installed brand new Archer AX2 Wifi 6 router and connected a brand new magicJack New 2022 VOIP Phone Adapter to the router. Everyday, my magicJack will drop out (unable to call out or receive calls). I do not know which one has problem. Router or MagicJack? If anyone experience the same problem, please share with me. Thanks a lot!
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
Are you able to tell if the device is losing its connection to the local network, or can it not connect to the internet?
Usually, this is caused by a device supporting only the 2.4 Ghz band and the router attempting to reorganize and prioritize the connections with the Smart Connect Feature. You may try disabling this setting, making sure that your SSIDs are matching, and then attempting to connect again. This passes the responsibility of band switching from the router to the client devices.
- Copy Link
- Report Inappropriate Content
Thanks for the quick reply! The MagicJack is connected to the router directly through an ethernet cable (RJ45), so there will be no SSID problem. By the way, how do I disable the Smart Connect Feature? Thanks again.
- Copy Link
- Report Inappropriate Content
For the Smart Connect Feature, there will be an available toggle on the web page where you can set the SSID of the network, this will break the bands apart into separate sections. If the device is wired into the LAN ports on the router, you may be able to see errors for the device disconnecting in the system logs on the router to try and determine a cause.
I would make sure that if you change LAN ports and Ethernet wires the issue does not follow as it could very well be the network cable. I would also double check that your modem from your ISP does not have wireless capabilities. If it does, then there are conflicts occurring, and either the modem needs to be placed in bridge or passthrough mode, or the router will need to be configured as an Access Point.
- Copy Link
- Report Inappropriate Content
Hi
Thanks again for you to follow this thread.
It looks like the Smart Connect Feature is for wireless, so I did not bother with that.
Yesterday, I enabled IPTV/VLAN under Quick Setup-Network- IPTV/VLAN because I saw the sentence “Configure IPTV/VLAN setting if you want to enjoy IPTV or VoIP service, or your ISP requires VLAN tags” and because my MagicJack is VoIP phone service. I wished enabling IPTV/VLAN would fix the problem, but this morning, MagicJack dropped out again. I did not find any error report for the device disconnecting in the system. Where do I find the system log?
One thing I could not do when I enabled IPTV/VLAN yesterday was to set LAN2 (MagicJack is connected to LAN2) as “VoIP” instead of “internet”, the pull-down menu for each LAN only allow 2 choices: internet or IPTV, the other 2 choices are greyed out(unable to select). See attached screenshot. Do you know how to make VoIP available for individual LANs?
BTW, I have changed LAN ports and Ethernet wires, none of the changes will make any difference.
My ISP(Spectrum) provides only Modem, with no wireless capability.
- Copy Link
- Report Inappropriate Content
Information
Helpful: 0
Views: 1052
Replies: 4
Voters 0
No one has voted for it yet.