Multiple SSID Mesh Extension

Multiple SSID Mesh Extension

Multiple SSID Mesh Extension
Multiple SSID Mesh Extension
2023-11-29 12:58:05 - last edited 2024-05-21 14:34:41
Model: RE500X  
Hardware Version:
Firmware Version:

Hi all.

 

I own an Archer AX53 router and I am planning to extend the network as Mesh using a TPLink extender as network speed when changing floors at home.

 

I wonder if it's possible to create, using a single device, a Mesh network for three SSID: Main 5ghz, guest 5ghz and IoT 2.4 GHz (the possibility to handle 6 different SSID is something I love from this router).

 

Thank you.

  1      
  1      
#1
Options
1 Accepted Solution
Re:Multiple SSID Mesh Extension-Solution
2024-04-16 05:58:46 - last edited 2024-05-21 17:41:22

When building a mesh network with a range extender there's a known limitation that won't allow you to extend the main router guest and IoT networks through the RE.

If this was helpful click once on the arrow pointing upward. If this solves your issue, click once the star to mark it as a "Recommended Solution".
Recommended Solution
  2  
  2  
#3
Options
3 Reply
Re:Multiple SSID Mesh Extension
2024-04-13 16:30:11

  @Mylotarg 

 

Hi! Did this work for you? Thanks!

  0  
  0  
#2
Options
Re:Multiple SSID Mesh Extension-Solution
2024-04-16 05:58:46 - last edited 2024-05-21 17:41:22

When building a mesh network with a range extender there's a known limitation that won't allow you to extend the main router guest and IoT networks through the RE.

If this was helpful click once on the arrow pointing upward. If this solves your issue, click once the star to mark it as a "Recommended Solution".
Recommended Solution
  2  
  2  
#3
Options
Re:Multiple SSID Mesh Extension
2024-05-21 14:36:23
Thanks for the info, this is what I was afraid of. @EmmaPeel007 finally used the AX53 as an AP paired with the ISP original router and got MESH-like functionalities playing a bit with the intended SSID use and the (lack of) mobility of some devices that would be connected to the overlapping networks. To date, using this suboptimal config, I have been able to make everything work OK
  1  
  1  
#4
Options