AP mode
This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
I have succesfully setup the AX3200 in AP mode.
In the configuration INTERNET/LAN configuration
MAc Address xxxxxxxxxxx
IP type is set to Dynamic with IP 192.168.0.xxx
Default gateway 192..168.0.xxx
The question is can I set the IP type to static ?? Is it a good idea?
If I try to do this , it wants the primary DNS , should it be the same as the main router ?
The reason that I want static is that the link tplinkwifi.net never works for me on my pC and I need to use the IP address to login.
thanks
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
Yes, in your case it's a good idea to set a sttaic IP address in AP mode.
The DNS should be the IP address of your main router.
- Copy Link
- Report Inappropriate Content
Any idea why the tplinkwifi page does not load on my PC but it works on my phone over wifi?
I get the following on all 3 browsers, incognito mode, clear cache etc.
Trying to configure the Router?
It looks like you aren't connected to your TP-Link network.
To access tplinkwifi.net, your device must be connected to TP-Link Router’s network. Please check your network connection and try again.
If this issue still exists, try these following solutions:
Solution One:
Some Web browsers may have cached this page by accident, you can clear the cache and history of your browser and try again.
Besides, you can also try a different browser to access http://tplinkwifi.net.
Solution Two:
You may get the wrong DNS Server. You can use the Router's IP address http://192.168.0.1 or http://192.168.1.1 to login instead of tplinkwifi.net.
It is recommended to connect your device directly to TP-Link router with the wired Ethernet cable.
Note：For Aginet Mesh Devices, Please use http://192.168.88.1 to login instead of tplinkwifi.net.
Solution Three:
- Copy Link
- Report Inappropriate Content
Most probably it works on your phone because you're connected to the wireless SSID of the router.
If your PC is connected to your main router it won't work and you'll get that message.
- Copy Link
- Report Inappropriate Content
I understand your answer but why it works on wifi and not with the PC connected to the router (any technical issue you can explain?) .... I did not read anywhere that you need to be in wifi to use the link? Am I mistaken? thanks
- Copy Link
- Report Inappropriate Content
It's in your previous post:
"To access tplinkwifi.net, your device must be connected to TP-Link Router’s network".
If your PC is connected to your main router but not AX3200 it won't work.
That's not a technical issue and is nothing to worry about.
What you can do is to set AX3200 IP address to 192.168.0.254 (outside your main router's DHCP pool).
That if your main router is with LAN IP address 192.168.0.1 - hus you''ll always know AX3200 IP address (for accessing its web management).
- Copy Link
- Report Inappropriate Content
I set the IP of the AX3200 AP to the IP address given by the router when it was not on static mode.
So my main router IP 192.168.0.100
the Ax3200 AP is on IP 192.168.0134 (static now) <<<---------------- Is this wrong? I did not reboot the router yet but I can connect from anywhere using the IP address of both devices.
- Copy Link
- Report Inappropriate Content
No, it's no worng. It's just your choice of numbers. Once with static IP address AX3200 can be accessed from anywhere via its IP address.
- Copy Link
- Report Inappropriate Content
Thanks for your quick responses. Last question .. in your message above you mentioned to set the IP address 254 (outside your main router's DHCP pool). I am wondering does this have an advantage?
- Copy Link
- Report Inappropriate Content
I'll give you an example:
Lets ssay your main rouuter is with IP address 192.168.0.100.
Lets say that its DHCP server pool is within the range 192.168.0.101 to 192.168.0.199
If you set a static IP address on AX32000 to 192.168.0.254 it won't interfere with any other device that may log into your network.
Thus any possible IP address conflicts will be avoided.
- Copy Link
- Report Inappropriate Content
Information
Helpful: 0
Views: 782
Replies: 9
Voters 0
No one has voted for it yet.