@Riley_S 

The BE63 is set at the main. The devices are showing online, just connected as a wired connection which isn't accurate and limits management capabilities. Will the optimizations for the test firmware also correct this issue in addition to the offline issue you mentioned? 

I do not have a switch connected. 

Hey, @Riley_S any updates?

X60 here doing the same, maybe?

I have a reolink camera that is physically closer to one X60 so I wanted to force it to that one. After doing this the reolink now thinks it is wired and not wireless. I can't change it back.

Brand new deco system, fully updated firmware, AP mode to my main ATT Router. Two of the three deco are setup with Ethernet backhaul, the main and one other, which is the one I wanted the reolink to go to. Unplugged the ethernet from that one makes no difference the reolink still shows as wired.

Really irritating issue. I'm about ready to take the deco system back to BestBuy and try a different mesh system.

@Tako2sday 

Had any updates?

I have an X20 setup here doing the same.

I have a three pod setup with a TV box connected to one X20.

Had the X20's for a couple of years in Router mode and only recently needed to change to use AP mode.

The main deco is connected to the router and the other two connected via Wifi.

After changing to AP mode, it seems a number of mobile devices now show as connected by ethernet instead of wifi.

Really irritating issue as it seems that the devices will now not roam to connect to the best signal from the nearest pod and are now stuck connected to the main deco.

Current firmware version 1.5.5 Build 20240718 Rel. 44414

Having this same issue...help please TP-Link.  :)

I experience the same behaviour with my XE75(2.0) firmware version "1.2.9 Build 20240724 Rel. 39578"

ISP's cable modem -> Main Deco -> Hallway deco (wirelessly connected to main deco) -> Asus RT-AX86S configured in access point mode (wired into Hallway deco) -> Son's iphone

In the above setup, my son's iphone shows us as wired.

My above setup is complicated and unfortunate. I'm forced to do it this way because of Deco XE75's lack of wireless auto-block feature: https://community.tp-link.com/en/home/forum/topic/649846?replyId=1438202

I'm using my Asus router to enforce MAC filtering on the Asus router's wireless network (where I white-listed only a few mac addresses).

  @couimet 

Archer 1500 and yet two re750 satellites. None set as AP. Archer keeps switching my Rokus to wired and then they won't work. Reboot Archer and they go back for a while.  I think it may have something to do with them setup as smart mesh or whatever they call it. Nice to see TP is so helpful. My 8 year old Netgear has less issues. These may be going back if I'm still in return window.