Ethernet speed drops weekly
I consistently have to unplug and replug the ethernet cable in in order to get my full speed. (my laptop is plugged directly to the deco)
This will last a few days and then it throttles back down to under 100 down.
qos is off
beamforming is off
yes the cables are new 6e
I have seen some other posts with similar sounding issues
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
@ITguy2025 This X55 model has hardware versions:
V1
V1.26
V1.32
V1.60
Take a peek under each unit and verify you have the correct and latest firmware for each. Still trying to make sense of it as I just acquired a RE235BE from Best Buy and the HW version number is 1.6, yet the support page has V1.60 and V1.6, and V1, with no firmware for V1.6...
- Copy Link
- Report Inappropriate Content
The version is 1.26
- Copy Link
- Report Inappropriate Content
@ITguy2025 Confirms you have the correct latest firmware. Are you able to set a reboot schedule on the X55 to see if that helps?
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
I would try turning off the UPNP feature and SIP ALG feature in the Deco App Under: More > Advanced > NAT Forwarding.
If turning those off doesn't improve your speed and if your model supports it turn off ECO mode - If your unit supports it you will find it under More in the deco app
I know you said you have brand new cables but it still could be a cable. issue I would try a different brand of cable. Here is just one example of a bad cable causing issues
https://community.tp-link.com/en/home/forum/topic/840634?replyId=1612458
- Copy Link
- Report Inappropriate Content
Information
Helpful: 0
Views: 234
Replies: 5
Voters 0
No one has voted for it yet.