Can't olpen 192.168.68.1
I recently bought 3 X75 routers and add them to my current M9 plus network. The replacement works perfectly. I don't have any internet issue. But I found just now that i can't log into the local router admin page, either 192.168.68.1. I can see the login page opened but not able to login with password. Please help. thanks.
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
@stormumd It may be the same password you use to log in here and post. Did you try this password already?
- Copy Link
- Report Inappropriate Content
@jzchen the password isn't the issue as i use the saved one by chrome. After clicking the login button, it gives no error info. The button greyed out for a couple of minutes but the web page doesn't change. Then the button comes back to be clickable again.
jzchen wrote
@stormumd It may be the same password you use to log in here and post. Did you try this password already?
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
Do you have an antivirus on your phone that could be blocking it? https://community.tp-link.com/us/home/forum/topic/841688?replyId=1610172
- Copy Link
- Report Inappropriate Content
@HelpFixDecoApp No. Same issue
- Copy Link
- Report Inappropriate Content
@HelpFixDecoApp I tried mac&windows chrome, also android tab. Same behavior. Not able to login
- Copy Link
- Report Inappropriate Content
@stormumd How many Decos total are running? Maybe you added the new ones as a separate network, then they would jump to a different "subnet" and may express this issue.
If you have both sets running now, I suggest you replace each of the old units with a new unit then try again, the link @HelpFixDecoApp gave.
- Copy Link
- Report Inappropriate Content
Here are some steps and tips to help you resolve this issue:
1) Ensure your device is connected to the Deco network (either via Wi-Fi or Ethernet). Only devices connected to the Deco network can access the web interface.
2) Use the correct login credentials. Please note that you need to use your TP-Link ID (account) password to log in to the Deco web interface, not your Wi-Fi password. If you recently changed your TP-Link ID password, make sure you have logged into the Deco app with the new password first, then use that same password for the web interface.
3) Try accessing the web interface through different URLs:
âĸ http://tplinkdeco.net or https://tplinkdeco.net
âĸ Or directly via the main Deco's LAN IP address, usually http://192.168.68.1
4) Disable any VPN applications on your computer or phone, as VPNs can block access to local network devices.
5) Additional notes:
âĸ The Deco web interface provides only basic information and limited functionality (such as viewing the Deco map, client devices, and manual firmware upgrades). For full configuration and management, please use the Deco app.
- Copy Link
- Report Inappropriate Content
@HelpFixDecoAppāĻāĻŽāĻŋ āĻĄā§āĻā§ āĻ ā§āĻ¯āĻžāĻĒāĻāĻŋ āĻā§āĻ˛āĻŦā§ āĻāĻŋāĻ¨ā§āĻ¤ā§ āĻāĻŽāĻŋ āĻ˛āĻāĻāĻ¨ āĻāĻ°āĻžāĻ° āĻĒāĻ°ā§ āĻ¸ā§āĻā§āĻ°āĻŋāĻ¨āĻāĻž āĻ¤ā§ āĻ¸ā§āĻāĻž āĻ¤ā§ āĻāĻŽāĻŋ āĻĻāĻŋāĻ¤ā§ āĻĒāĻžāĻ°āĻāĻŋ āĻ¨āĻž āĻāĻŽāĻŋ āĻāĻŋāĻāĻžāĻŦā§ āĻāĻāĻāĻŋ
āĻā§āĻ˛āĻ¤ā§ āĻĒāĻžāĻ°āĻŦā§ āĻāĻŽāĻžāĻā§ āĻāĻāĻā§ āĻŦā§āĻāĻŋāĻ¯āĻŧā§ āĻāĻĄāĻŽāĻŋāĻ¨ āĻĒāĻžāĻ¸āĻāĻ¯āĻŧāĻžāĻ°ā§āĻĄāĻāĻŋ āĻāĻŽāĻŋ āĻ¸āĻ āĻŋāĻ āĻāĻžāĻŦā§ āĻĻāĻŋāĻ¤ā§ āĻĒāĻžāĻ°āĻāĻŋ āĻ¨āĻž āĻ¸ā§āĻāĻž āĻāĻŽāĻŋ āĻā§āĻ˛ā§ āĻā§āĻāĻŋ āĻāĻāĻ¨ āĻāĻŋāĻāĻžāĻŦā§ āĻāĻāĻŋ āĻĒā§āĻ¤ā§ āĻĒāĻžāĻ°āĻŋ
- Copy Link
- Report Inappropriate Content
@hossenmamun The translation I got was not clear, but sounds like you need to hard reset the router...
I similarly could not access the web UI on my Archer AX55 Pro. I had enabled secure login (via https). It is by default off. So once I was successful I immediately disabled secure login option. The AX55 is an AP and has a static IP I assigned to it...
- Copy Link
- Report Inappropriate Content
Information
Helpful: 1
Views: 3307
Replies: 10
Voters 1
