Second DHCP Server on LAN

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

Second DHCP Server on LAN

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
Second DHCP Server on LAN
Second DHCP Server on LAN
2017-07-05 22:09:15
Model :

Hardware Version :

Firmware Version :

ISP :

Hello, everybody.

I have a new TL-WA901ND Access Point (Ver. 5.0) and I have a big problem with DHCP Service.
The LAN-DHCP set-up of the AP is:

Static IP: 192.168.3.19
DHCP Start IP: 192.168.3.41
DHCP End IP: 192.168.3.50

I have also (in my LAN) a second DHCP Server (PBX), in another subnet (192.168.1.x).
All the devices that connects to the new AP, requests and takes address from the PBX (192.168.1.x) and ignores the AP.
Can someone knows something about that?
Can my AP ignore the other DHCP server and gives the addresses by itself?

Thank you in advance.
  0      
  0      
#1
Options
2 Reply
Re:Second DHCP Server on LAN
2017-07-06 19:49:34
That's what an access point should do, if you want to have two DHCP servers, then I think you need to use a router.
  0  
  0  
#2
Options
Re:Second DHCP Server on LAN
2017-07-06 19:49:58
That's what an access point should do, if you want to have two DHCP servers, then I think you need to use a router.
  0  
  0  
#3
Options