Airtime Fairness: Reducing Congestion in Wireless Networks

Used Products:
× 1
General Product

Airtime Fairness: Reducing Congestion in Wireless Networks

Nothing can be more annoying than a poor internet experience. If you are still suffering from slow Wi-Fi speed, it is time to try an amazing feature that is deployed on TP-link’s wireless routers, Airtime Fairness.

What is Airtime Fairness (ATF)?

Airtime Fairness is an optimization technique used to improve the overall transmission efficiency of a wireless network. "Airtime" here refers to the wireless transmission time a client takes to communicate with a Wireless Access Point (AP). With ATF enabled, AP can fairly allocate the airtime of different clients and prevent low-speed clients from taking up too much bandwidth.

How does Airtime Fairness work?

Before we start to talk about how ATF works, it is helpful to know something about wireless networks.

First, wireless transmission is ordered. As you may know, wireless signals are transmitted through electromagnetic waves. However, if different clients simultaneously communicate with an AP using the same frequency, it causes signal interference. Therefore, wireless networks are designed that only two devices can communicate with each other in the same frequency at the same time. That is, when one client is communicating with the AP, the other clients have to wait until the transmission is finished.

Second, clients connected to the same Wi-Fi always have different transmission rates. Many factors can affect the transmission rate but there are two important factors that could help you understand it.

The first one is the wireless network specification of device (802.11 wireless networking standards). No matter what kind of devices that you manage to join a wireless network, laptop, smartphone, tablet, etc., all of them have to meet 802.11 standards, the worldwide specification for wireless networking. Since 802.11 is a set of standards with many developed amendments, electrical products released in different periods may meet different 802.11 standards. That means your newly purchased cell phone with a higher 802.11 standard has a faster transmission rate than a tablet from 3 years ago.

The second one is the distance between the client and the AP. Clients far away from the AP usually will have reduced performance because of the weaker Wi-Fi signal.

When a client communicates with an AP, it needs time to transmit data, and the slower the client is, the more time it takes. High-speed clients would be over-encumbered causing long waiting times. This inevitably reduces the overall throughput of the entire wireless network.

 

 

With ATF enabled, the airtime would be fairly allocated to different clients, stopping slower clients from wasting time. High-speed clients would have more chances to take advantage of the network and help boost the overall network performance.

When should you enable Airtime Fairness?

TP-Link recommends enabling airtime fairness for the following situations:

  1. There are clients with varying Wi-Fi standards in the same wireless network: if you have a number of legacy devices mixed with newer devices in the wireless network, it is a good idea to enable ATF for a better wireless experience.
  2. There are clients located on the edge of a Wi-Fi dead zone: clients with weak signal may consume too much airtime and cause other clients to lag. It is best to enable ATF to guarantee that other clients can efficiently communicate with the AP.

 

 

2 Subscribe Bookmark

Comment

hi, my modem is Archer VR600v , how can enable ATF on this modem? please help me.

سلام. مودم من مدل Archer VR600v  هست لطفا راهنمایی کنید قیمت پوند چطور فعال کنم ؟

@muhammedSa 

 

 

Muhammed,

 

 

We acutally do not have support of that product in the US, because its not sold here.  You can however pose this question on this story located on our global Community and get the help you seek.  It is located here

upload
    upload