Archer C9 will not recognize volumes when using USB Hubs
This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
Archer C9 will not recognize volumes when using USB Hubs
Model : Archer C9
Hardware Version :
Firmware Version : 3.17.0
ISP :
Archer C9 v1
Of the three different brands of external USB 3.0 drives I've attached, the Archer C9 will only recognize one of them (a mybook) when using one of two different USB 3.0 hubs. The other drives are recognized successfully when directly connected to the USB 3 port on the C9, and all are recognized by my computers when using either hub.
Has anyone had this problem and found a workaround, or found a hub that works for multiple drives?
Hardware Version :
Firmware Version : 3.17.0
ISP :
Archer C9 v1
Of the three different brands of external USB 3.0 drives I've attached, the Archer C9 will only recognize one of them (a mybook) when using one of two different USB 3.0 hubs. The other drives are recognized successfully when directly connected to the USB 3 port on the C9, and all are recognized by my computers when using either hub.
Has anyone had this problem and found a workaround, or found a hub that works for multiple drives?