@rookie7799 

Make sure the M9 is what is connected to the modem. 

When you get no internet available, what is the color of the LED lights on both Deco units?

Are every single device connected to the Decos getting no internet?

Thanks. I'll try disabling it and will let you know how it goes.

After a few days of testing I'm still having the same issue. 

I don't understand, this mesh technology was supposed to be a seemless connection switching and now I'm back to what I had before - connection drop and reconnect. At least before it was done automatically and now my phone simply says no internet connectivity and stays that one until i disable\enable the wifi.

@rookie7799 

You can try the following and test to see if it helps:

1. Enable the fast roaming on your Deco network, and enable the guest network. Connect only your phone to the guest network and see how that performs.

2. Users of the same phone on other mesh network mentioned clearing the phones cache info has helped as possibly old network profiles were saved causing issues. I would recommend contacting the phone manufacturer for a propery way to do that or if that is advising to do.

Tony wrote

@rookie7799 

 

You can try the following and test to see if it helps:

 

1. Enable the fast roaming on your Deco network, and enable the guest network. Connect only your phone to the guest network and see how that performs.

 

2. Users of the same phone on other mesh network mentioned clearing the phones cache info has helped as possibly old network profiles were saved causing issues. I would recommend contacting the phone manufacturer for a propery way to do that or if that is advising to do.

Will try and reply with the findings, thnx

@Tony 

What you suggested did not work, however, I disabled 5Ghz on the main network and did not have any issues since.

What's the issue here?

@rookie7799 

Swap the bands to see if your phone is related specifically to the 5GHz. So have the 2.4Ghz disabled and only the 5GHz present and try and replicate the issue.

To clarify, both the S8 and the S10 were getting no internet, and now no longer have that problem with 5GHz being off? Or just the S10?

What is the software versions of both phones?

Additionally, log into your Deco with a web browser, the default IP is 192.168.68.1, use your TP-Link ID password. Go to "System" up top, and "Firmware Upgrade" left side. What firmware builds are you running for each Deco model? 

@Tony 

If I switch to 5Ghz only, more than half of my devices will not work (chromecasts, cameras etc).

All of my phones are having issues (Android 9)

Not sure what web page you are talking about but I've neen told that the only way to access deco admin is via tplink app...

Here are the version numbers for my decos.