home network not recognized
This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.home network not recognized
This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
I own an AC1900 Wireless Dual Band Archer router. Our home network is run through this router and has been for awhile. All of our cellphones recognize and use the network set up through this router.
Question: I have two new devices that have wireless capabilities. A new EPSON printer received during Christmas time. And Sonos OneSL speaker just purchased. When I try and connect these devices wirelessly neither recognizes my home network. They see other surrounding networks. Even when I try and manually enter the network name and password during setup, it is rejected.
They do see my ISP (Verizon) network. So, I think it has something to do with the TP Link router and its settings or something. Any help would be much apprectiated.
Sincerely,
ljdietrich
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
I finally got it to work. Couldn't understand why it at least would not work on the 2.4 network. So I decided to give it one last shot before I gave SONOS a call. Anyhow, brought the speaker into my office close to my router (not really sure if that made a difference). Factory reset the speaker, connected my phone to the TP-Link 2.4 GHz network and tried going through the app setup process again. And voila, it worked! I just need to switch my phone to the 2.4 network to stream music via the app, but not a big deal. Thanks for all the help!
Sincerely
ljdietrich
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
Product specification indicate the speakers work with both 2.4 or 5 GHz networks. These are new speakers.
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
Could be the Security you are using? Try disabling Security and see if it works?
Are you running Smart Connect? That could cause a problem, turn it off.
- Copy Link
- Report Inappropriate Content
Okay. Here is some more information. The speaker supports both 802.11a/n/ac 5GHz and 802.11 b/g/n 2.4GHz networks. I have set up TP-Link networks with the Archer router for both 5 and 2.4 GHz.
As a side note, my iphone and all other iphones in the house recognize both networks. We use the 5 GHz network.
When I try and set up the speaker with Sonos the app it initiates the "Airport Setup". It only "sees" the TP-Link 2.4 GHz network (as well as other surrounding neighborhood networks including our home Verizon network). It does recognize our main Home Network - the TP-Link 5GHz network that we all use for our phones and computers. When I try connecting the speaker to the 2.4 GHz network I get an unexpected error.
I've tried disabling the 5GHz network via the TP-Link admin site and I completely lose that network. I tried changing the channel from 153 to "auto." Auto is how the 2.4 GHz network is setup. Auto places that network on Chanell 11. That didn't work either.
We have a pretty new hi-bandwith Verizon modem so I doubt bandwith is the problem.
Not sure what else to try. I may have to contact Sonos next unless you have any more suggestions.
Thanks
Lars Dietrich
- Copy Link
- Report Inappropriate Content
Another thing I should mention.
The speakers connect to "home wifi networks with any 802.11b/g/n router. 802.11n only network configurations are not supported" The 2.4 GHz network mode is 11b/g/n mixed. The 5 GHz network's mode is 11a/n/ac mixed. Could that be the issue?
Thanks
ljdietrich
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
I finally got it to work. Couldn't understand why it at least would not work on the 2.4 network. So I decided to give it one last shot before I gave SONOS a call. Anyhow, brought the speaker into my office close to my router (not really sure if that made a difference). Factory reset the speaker, connected my phone to the TP-Link 2.4 GHz network and tried going through the app setup process again. And voila, it worked! I just need to switch my phone to the 2.4 network to stream music via the app, but not a big deal. Thanks for all the help!
Sincerely
ljdietrich
- Copy Link
- Report Inappropriate Content
Information
Helpful: 0
Views: 1674
Replies: 11
Voters 0
No one has voted for it yet.