Home Network Community > All Threads > One mesh
< All Threads

One mesh

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

One mesh

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
One mesh
One mesh
2021-09-14 14:47:30 - last edited 2021-09-19 18:52:15

Tengo un router C80ac1900 archer y 2 extensores re505x One mesh no funciona bien a menudo demora en cambiar de repetidor y se corta

  0      
 
  0      
 
#1
Options
10 Reply
Re:One mesh
2021-09-15 02:34:08 - last edited 2021-09-19 18:52:15

@GabrielRit 

 

Are both RE505X connected to the C80, or does one RE505X connect to the other in a daisy chain? What if you only connect one RE505X to the network, will you switch between the C80 and repeater properly?

 

How long does it take to connect to the other wireless network when a phone or laptop roams from the RE505X network to the C80's, or vice versa? 


What is the wireless security type on the C80? Try to fix it on WPA2-PSK, AES, then configure the same on the RE505X, reboot them to confirm.

Nice to Meet You in Our TP-Link Community. Check Out the Latest Posts: Connect TP-Link Archer BE550 to Germany's DS-Lite (Dual Stack Lite) Internet via WAN Archer GE550 - BE9300 Tri-Band Wi-Fi 7 Gaming Router Archer BE800 New Firmware Added Support for EasyMesh in AP Mode, DoH&DoT, and 3-Band MLO Connection Archer AX90 New Firmware Added Support for EasyMesh and Ethernet Backhaul If you found a post or response helpful, please click Helpful (arrow pointing upward icon). If you are the author of a topic, remember to mark a helpful reply as the "Recommended Solution" (star icon) so that others can benefit from it.
  0  
  0  
#2
Options
Re:One mesh
2021-09-15 03:57:56

Reinicie los extensores a valores de fabrica y configure de nuevo

Ahora cambian bien entre los tres

En algunas ocasiones cambia bien y en otras es muy lento.Podria mejorar con el router AX20

Si camino normal a veces se corta antes de cambiar y si me detengo demora .

  0  
  0  
#3
Options
Re:One mesh
2021-09-15 05:04:54

Tiene WPA/WPA2 Personal

Cambie WPA3 y de nuevo cambia solo entre los extensores ,cuando voy al router cambia, pero  luego con los extensores no.Volvi a la seguridad anterior, sigue mal.

En los extensores no pude cambiar la seguridad

  0  
  0  
#4
Options
Re:One mesh
2021-09-15 05:13:37
Desconecte un extensor del mesh y luego lo volvi a conectar quizas eso afecto Luego reinicie todo pero no funciona
  0  
  0  
#5
Options
Re:One mesh
2021-09-15 15:14:35

Ahora funciona bien entre extensores pero cuando la toma el router la senal camino hacia un extensor y demora mucho en cambiar

  0  
  0  
#6
Options
Re:One mesh
2021-09-17 03:00:49 - last edited 2021-09-17 08:21:42
Si conecto un solo extensor pasa lo mismo
  0  
  0  
#7
Options
Re:One mesh
2021-09-17 08:21:32

@GabrielRit 

 

What are the devices you are testing the Onemesh roaming between the router and the extender? Are all of them behaving the same?

 

To locate this issue and try to fix it, we would like to follow up on your case via email. Please check your inbox and provide the information that we need.

Nice to Meet You in Our TP-Link Community. Check Out the Latest Posts: Connect TP-Link Archer BE550 to Germany's DS-Lite (Dual Stack Lite) Internet via WAN Archer GE550 - BE9300 Tri-Band Wi-Fi 7 Gaming Router Archer BE800 New Firmware Added Support for EasyMesh in AP Mode, DoH&DoT, and 3-Band MLO Connection Archer AX90 New Firmware Added Support for EasyMesh and Ethernet Backhaul If you found a post or response helpful, please click Helpful (arrow pointing upward icon). If you are the author of a topic, remember to mark a helpful reply as the "Recommended Solution" (star icon) so that others can benefit from it.
  0  
  0  
#8
Options
Re:One mesh
2021-09-17 13:56:24

Demora en cambiar , a veces  cambia

y luego se corta para volverse a conectar posteriormente

  0  
  0  
#9
Options
Re:One mesh
2021-09-19 01:29:29

Puede ser que el router C80ac1900 no funcione bien con estos extensores

Con el AX20 funcionaría mejor?

  0  
  0  
#10
Options
Re:One mesh
2021-09-19 15:31:18

Cambia  bien entre extensores

Luego toma la señal el router cuando camino hacia él

Cuando me muevo nuevamente hacia un extensor generalmente no cambia

Alguien me puede ayudar

Puede ser incompatibilidad entre el extensor re505x y el router C80ac1900

Gracias.

  0  
  0  
#11
Options

Information

Helpful: 0

Views: 1409

Replies: 10

Related Articles
Ax1500 one mesh
12438 1
What is OneMesh?
4167 1
What is OneMesh
663 0
Archer AX11000 one mesh
2028 0
Ax1500 onemesh
550 0
OneMesh not working (?)
447 1
About Us
Press
Copyright © TP-Link Systems Inc. All rights reserved.