Home Network Community > All Threads > Archer AX10000 and AX1500 in a Mesh Network - Who DOes the DHCP?
< All Threads

Archer AX10000 and AX1500 in a Mesh Network - Who DOes the DHCP?

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

Archer AX10000 and AX1500 in a Mesh Network - Who DOes the DHCP?

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
Archer AX10000 and AX1500 in a Mesh Network - Who DOes the DHCP?
Archer AX10000 and AX1500 in a Mesh Network - Who DOes the DHCP?
2022-06-18 13:08:17
Model: Archer AX10000  
Hardware Version: V1
Firmware Version:

I had devices dropping offline but they seemed to have stopped after changing DHCP settings.

 

I originally had the AX10000 dolling out the IPs but just changed to have the AX1500 (RE505X) provide IPs via DHCP to thise devices that connect to it.

 

What is the "blessed" set-up for DHCP when set-up as a OneMesh environment?

  0      
 
  0      
 
#1
Options
1 Reply
Re:Archer AX10000 and AX1500 in a Mesh Network - Who DOes the DHCP?
2022-06-21 06:19:14

@ReDTyDe 

 

I believe the network layout should be like the below, correct me if it's not:

ISP modem ------ Archer AX11000 (acts as the main router and DHCP gateway) )))((( RE505X (connect to the AX11000 via Onemesh)

 

In this scenario, the AX11000 should be the main router and act as the DHCP gateway for the network. You can leave the DHCP settings on the RE505X by default. In this case, I would suggest resetting the RE505X to factory defaults, and reconfiguring it from scratch as follows:

How to Configure OneMesh Range Extender via Tether app?

Nice to Meet You in Our TP-Link Community. Check Out the Latest Posts: Connect TP-Link Archer BE550 to Germany's DS-Lite (Dual Stack Lite) Internet via WAN Archer GE550 - BE9300 Tri-Band Wi-Fi 7 Gaming Router Archer BE800 New Firmware Added Support for EasyMesh in AP Mode, DoH&DoT, and 3-Band MLO Connection Archer AX90 New Firmware Added Support for EasyMesh and Ethernet Backhaul If you found a post or response helpful, please click Helpful (arrow pointing upward icon). If you are the author of a topic, remember to mark a helpful reply as the "Recommended Solution" (star icon) so that others can benefit from it.
  0  
  0  
#2
Options

Information

Helpful: 0

Views: 676

Replies: 1

Related Articles
Archer AX10000 - "No Route to Host" on same subnet
650 0
Archer AX10000 and AX11000
731 2
Archer AX10000 - Cannot AirPlay to Devices
564 0
Tether wont login to Archer AX10000
510 0
Connecting USB Printer to AX10000
1050 0
AX10000 Bridge Mode?
1077 0
About Us
Press
Copyright © TP-Link Systems Inc. All rights reserved.