IoT network issue on Deco X55
I have a fairly new 3-pack Deco X55 system, v1.6, which I really like. TP-Link just released a new firmware version (1.2.0 Build 20230113 Rel. 54525) with a separate IoT network feature, which is what I (and many others apparently) have been waiting for. It's great that TP-Link is listening!
However, I installed the new firmware, but unfortunately I think that they messed up and didn't really understand what was needed. In particular, I did some simple testing, and when logged on the IoT WiFi SSID, I can see all the devices on my main network: computers, NAS, printers, etc. IMO, the main point of an IoT network is to isolate the IoT devices from the rest of the network, so this new feature is basically useless to me as-is! Does anyone know of a workaround? If not, I'm hoping the the TP-Link engineering team is listening and can fix this soon. Right now I maintain two physically separate router networks, one dedicated for IoT, but it would be great to use the Deco X55 for both functions.
Also, I really want the option of having the IoT network devices see each other, but not devices on the main network. That way, if multiple IoT devices need to talk to each other, they could do so (if I so allow), but the main network is protected. As another example, sometimes during the setup for a new IoT device, the configuring system (phone app or website) needs to be able to talk directly to the IoT device, which isn't usually possible on a guest network. If TP-Link is listening here, this should be a user-selectable option on the IoT network (as well as on the guest network, imo). I have seen older D-Link routers that had that kind of user-selectable option on their guest network, and it was very useful at times (e.g., when configuring a new IoT device).
Any input or feedback is appreciated. Thanks!
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
I'm looking forward to your article when you finish it. I have been testing the device isolation feature that was added to the AX55 in the last firmware update. It works well when the router is in the wireless router mode but doesn't work when the router is configured as an access point, even though the devices are listed in the main router's isolation list. I'm hoping this gets added (or fixed) in a future update. For now, the IoT device is only isolated if it connects to the main router instead of the access point. I have devices that are midway between the two and can connect to either depending on several factors.
One suggestion I have for future implementation is to perhaps have several groups within the isolated devices configuration which would allow the devices in a particular group to communicate with each other but not with all the other isolated devices. This way smart bulbs, Amazon devices, etc. could be grouped and separated from each other and the main network.
Another feature I can recommend is to be able to specify a device(s), much like for remote management, that can access the isolated devices for configuration or monitoring purposes. As it is now, a PC on the main network can not access an isolated device unless the PC is then too isolated or the device is dropped from the isolated list.
- Copy Link
- Report Inappropriate Content
@Riley_S ,
Any idea when this new firmware will be rolled out to the Deco X55? I am another user who wishes to isolate the devices on the IoT network. When I check for updates, I am told that I am up to date running firmware 1.1.0 Build 20230522 Rel. 68968
- Copy Link
- Report Inappropriate Content
Hey @Scott_Me,
I believe that the X55 has received the update already. What hardware version are you using?
If the update is not detected, you may try changing the DNS server of your Deco network to see if this will allow the update to appear. Otherwise, you may always perform a manual upgrade using the firmware listed on the download page for your hardware version: https://www.tp-link.com/us/support/download/deco-x55/v1/#Firmware
- Copy Link
- Report Inappropriate Content
Thank you for the response. It appears I have hardware version 1.26. From the support link, the version available for download is Deco X55(US)_V1.26_1.1.0 Build 20230522, which is what I have installed on the device already.
- Copy Link
- Report Inappropriate Content
Everything indicates that you the IoT network was included in that firmware update for the 1.26 version. Make sure that you are checking all the tabs in the app for the feature, as it will not be enabled by default. Are you able to see any of the other features that were added in that update? Are your Decos running in AP Mode or Router Mode?
- Copy Link
- Report Inappropriate Content
@Riley_S ,
I am in router mode. There are no other options for the IoT network other than turning it on/off, setting password, security method, and enabling the bands. Here is a screen shot:
- Copy Link
- Report Inappropriate Content
Ah gotcha, so the IoT network and device isolation are separate features since you can isolate devices that are connected to any of your Deco's networks. The options for device isolation can be found on the security page. Check out this FAQ for specifically the device isolation feature: Using Device Isolation on Deco
- Copy Link
- Report Inappropriate Content
Okay, I see the device isolation feature under the security settings and it appears to work, as I can no longer ping a device that has been isolated from my non-isolated desktop PC. It's not quite how I was expecting this to be implemented, but I guess it works. Thanks for all of your help with this.
- Copy Link
- Report Inappropriate Content
How can I get ethernet connected devices onto the IoT network?
- Copy Link
- Report Inappropriate Content
There is no real purpose in directly adding an ethernet device to the IoT network, instead you should look towards the Device Isolation feature which will allow the isolated to device to see any other isolated devices on your network, but will not allow for communication with the other devices on your network.
- Copy Link
- Report Inappropriate Content
Information
Helpful: 4
Views: 13978
Replies: 34
Voters 2
