IoT 2.4 network

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

IoT 2.4 network

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
IoT 2.4 network
IoT 2.4 network
2023-06-16 21:39:39
Model: Archer AX55  
Hardware Version: V1
Firmware Version: 1.2.0

I want to move all my IoT devices from my main 2.4 network to the new IoT 2.4 network.

My main 2.4 SSID is "Home24" can I just change the new IoT 2.4 SSID to "Home24" and my main to "Home24a"?

Would they all connect to "Home24"?

 

Thanks, niabil

  0      
  0      
#1
Options
3 Reply
Re:IoT 2.4 network
2023-06-17 11:00:48

  @niabil 

 

It should not be a problem as long as the SSID and password are the same. I did the same thing with the only difference being that I had the IoT SSID on the guest network instead of the main network. All devices connected without any problems after the change.

 

  1  
  1  
#2
Options
Re:IoT 2.4 network
2023-06-18 04:41:13

  @niabil 

Thanks, jra11500, I made the change to the IoT2.4 SSID to "Home24" and change to main 2.4 to "Home2", all my devices connected seamlessly. 

 

Question - if I disable the main 2.4  Network will the IoT2.4 still work, they seem to mimic each other on the wifi analyser.

  0  
  0  
#3
Options
Re:IoT 2.4 network
2023-06-18 08:26:28
If you disable the main network, it will also disable the IoT and guest networks.
  1  
  1  
#4
Options