Home Network Community > All Threads > TL-WA3001 giving "Operation Failed" on screen when trying to access configuration UI
< All Threads

TL-WA3001 giving "Operation Failed" on screen when trying to access configuration UI

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

TL-WA3001 giving "Operation Failed" on screen when trying to access configuration UI

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
TL-WA3001 giving "Operation Failed" on screen when trying to access configuration UI
TL-WA3001 giving "Operation Failed" on screen when trying to access configuration UI
2023-06-18 13:51:13 - last edited 2023-06-18 13:53:39
Model: TL-WA1201  
Hardware Version:
Firmware Version:

First, please add TL-WA3001 to the models list selection so posts can be properly tagged.

 

When I try to access the configuration UI of TL-WA3001 by using the assigned static IP it fails to show the full UI, instead giving nearly a blank screen showing "Operation Failed".

 

The image below is from Edge browser, but I've tried Chrome and Pale Moon too, and the UI doesn't open on either of those either.

 

What's going on here? How can I access the UI using web browser and the AP's IP?

 

09a84e9891eb4103adb8c394a69cf3eb

 

 

  0      
 
  0      
 
#1
Options
2 Reply
Re:TL-WA3001 giving "Operation Failed" on screen when trying to access configuration UI
2023-06-20 15:03:51

Rebooted AP (power cycled) now can again access the UT.

 

Must be a glitch in the firmware or whatever. Hopefully something can be patched up.

  1  
  1  
#2
Options
Re:TL-WA3001 giving "Operation Failed" on screen when trying to access configuration UI
2023-07-09 15:20:18 - last edited 2023-07-09 15:32:15

Back to "Operation Failed" again when trying to access the UI.

 

First the multiSSID +VLANs didn't/don't work the way I expected/wanted which was the main reason I replaced the old rusty but trusty Netgear R7000, now this problem with accessing the UI.

 

Good thing I didn't yet get rid of my old Netgear R7000. Seriously thinking about pulling the plug in this clunker WA3001. Sucks it's already past the Amazon return/refund date.

  3  
  3  
#3
Options

Information

Helpful: 0

Views: 638

Replies: 2

Related Articles
DHCP Issues wtih TL-WA3001
437 0
TL-SG105MPE not powering TL-WA3001 through PoE
576 1
Unable to access TL-WA3001 management page over Wifi when on separate VLAN
153 0
OneMesh "Operation Failed" error on Archer AXE75
646 0
TL-WA3001 VLAN Configuration Not Saving
1022 0
TL-WA3001 Hardware version conflict?
28 0
About Us
Press
Copyright © TP-Link Systems Inc. All rights reserved.