OneMesh "Operation Failed" error on Archer AXE75

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

OneMesh "Operation Failed" error on Archer AXE75

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
OneMesh "Operation Failed" error on Archer AXE75
OneMesh "Operation Failed" error on Archer AXE75
2024-04-21 22:08:33 - last edited 2024-05-09 21:41:56
Model: Archer AXE75  
Hardware Version: V1
Firmware Version: 1.1.9 Build 20231115 rel.37295(4555)

While running this setup:

 

fc78c27a1fc74a3dabc4a549eb66d246

 

Where Router1 is connected to Router2 via LAN to LAN port, I try to initialize OneMesh network, but getting "Operation Failed" error.

 

This is the route to the error:

  • from web interface http://192.168.1.1 of Router 1
  • I enter Advanced settings
  • and select OneMesh option
  • where I see correctly, my Router 2 (that sits on http://192.168.1.2)
  • and by pressing OK button the "Operation Failed" error appears on bottom and nothing happens

 

42f9cd4c92af43a4be9e822d5c8620d3

 

b72a76b8c308473f923dff93ef9c8fc1

 

 

Alternatives:

  • I also tried to re-plug the cable into WAN port like Router_1_LAN >>> WAN_Router_2 but with this kind of setup none of the both routers detect the other one and I get only this dumb screen: 

 

67bbe838cbce4f62ad2b1857b0415e04

 

Questions:

  • how can be this error resolved?
  • what kind of settings needs to be triggered to initialize OneMesh between two routers?
  • what did I miss to set up? (as non-IT person I have no idea what I'm doing)

 

 

 

  0      
  0      
#1
Options
1 Accepted Solution
Re:OneMesh "Operation Failed" error on Archer AXE75-Solution
2024-05-09 20:51:47 - last edited 2024-05-09 21:41:56

  @hWmMzIfYNRISEgn 

 

If there is newer official firmware available on the cloud for the satellite router, you will see it on the main router web interface and could update the satellite firmware directly on the main router page.

Keep the connection as it is - LAN to WAN.

If this was helpful click once on the arrow pointing upward. If this solves your issue, click once the star to mark it as a "Recommended Solution".
Recommended Solution
  1  
  1  
#6
Options
5 Reply
Re:OneMesh "Operation Failed" error on Archer AXE75
2024-04-23 02:29:39 - last edited 2024-04-23 06:26:58

  @hWmMzIfYNRISEgn 

 

You're doing just fine, but Onemesh doesn't support building mesh between two routers - check Onemesh FAQ - Q10/A10.

If AXE75 receive a FW update with Easymesh support then you will be able to achieve what you want.

If this was helpful click once on the arrow pointing upward. If this solves your issue, click once the star to mark it as a "Recommended Solution".
  0  
  0  
#2
Options
Re:OneMesh "Operation Failed" error on Archer AXE75
2024-05-09 18:27:10

  @terziyski it now received EasyMesh upgrade. devices were successfully connected MainRouterLAN > SatelliteRouterWAN (should it be LAN to LAN port?)

 

my last question is: how do I access Satellite router? I want to change IP of Satellite router and in future - update firmware on Satellite router. any guidelines on this subject?

  0  
  0  
#3
Options
Re:OneMesh "Operation Failed" error on Archer AXE75
2024-05-09 18:32:51

  @hWmMzIfYNRISEgn 

 

By design you won't have access to the satelitte device WebGUI.

If you need to update its FW refer this post.

If this was helpful click once on the arrow pointing upward. If this solves your issue, click once the star to mark it as a "Recommended Solution".
  0  
  0  
#4
Options
Re:OneMesh "Operation Failed" error on Archer AXE75
2024-05-09 18:57:26 - last edited 2024-05-09 18:59:57

@terziyski  I see, so in order to update we need to factory reset whole device to exit Satellite mode ? also, LAN to LAN or LAN to WAN or does not matter?

  0  
  0  
#5
Options
Re:OneMesh "Operation Failed" error on Archer AXE75-Solution
2024-05-09 20:51:47 - last edited 2024-05-09 21:41:56

  @hWmMzIfYNRISEgn 

 

If there is newer official firmware available on the cloud for the satellite router, you will see it on the main router web interface and could update the satellite firmware directly on the main router page.

Keep the connection as it is - LAN to WAN.

If this was helpful click once on the arrow pointing upward. If this solves your issue, click once the star to mark it as a "Recommended Solution".
Recommended Solution
  1  
  1  
#6
Options

Information

Helpful: 0

Views: 655

Replies: 5

Related Articles