I am having terrible times with the device and Google Fiber.  This morning there was no connection so I did all the following without any positive results:

1) power cycled the Deco -- no joy

2) Power cycled the GF line drop (with the Deco still powered on and connected)

3) Power cycled the GF line drop (with the Deco powered off), connected the ethernet cable, and turned the Deco power back on.

In between tests, I plugged the ethernet cable from the GF drop into my laptop to confirm GF was still active. This is not a GF problem.

I'm running out of ideas on what to do.  I'd do a factory reset and start all over fresh with the Deco, but I'm worried that if I do that and the Deco doesn't pick up the ethernet signal then I'll be really screwed -- a reset Deco that I can't communicate with at all.

Ideas on how I should proceed?