Forums/
Deco
2023-10-18 16:38:23
@BillsDunk, Just to be sure, the network switch is placed between the Main Deco and the satellite nodes, correct? There should only be one coming from your modem and it should go directly into your...
1HELPFULS
Forums/
Wi-Fi Routers
2023-10-17 17:31:44
@MulletMarmot, A few things: Is your fiber modem in IP Passthrough or Bridge Mode so that you are not creating a Dual-NAT situation with the A7? What is the speed seen when connected into one of the...
0HELPFULS
Forums/
Deco
2023-10-17 17:24:23
Hey @Oxley, Do you have any odd behaviors that are occurring on your network? Possible as a result of these errors? I can try to help, but without additional context, such as behaviors, what devices...
0HELPFULS
Forums/
Deco
2023-10-17 17:18:57
@NeedMoreHelp, I would recommend checking all of your connections and trying different ports as it is odd that it cannot recover its wired connection. I would recommend trying to plug in a laptop or...
0HELPFULS
Forums/
Deco
2023-10-17 16:58:07
@dezerving, There is no real purpose in directly adding an ethernet device to the IoT network, instead you should look towards the Device Isolation feature which will allow the isolated to device to...
1HELPFULS
Forums/
Deco
2023-10-17 16:56:26
@RobotimusPrime, It may have been that your powerline or ethernet connections had become disconnected or had created a network loop while switching backhaul methods. If you experience the behavior...
0HELPFULS