Forums/
Deco
2023-09-14 10:36:04
@Panyk_Attak If you want to make a single mesh with your two Decos in router mode, I believe one Deco must be connected between the xfinity box and the switch. See this :...
0HELPFULS
Forums/
Deco
2023-09-14 10:22:26
@Panyk_Attak From what I see, the blue cables are coming from the RJ45 plugs in your house and are connected to the bottom appliance, and you have short black cables connecting the bottom appliance...
0HELPFULS
Forums/
Deco
2023-09-12 11:50:39
Usually, devices cannot reject or pick up addresses, addresses are assigned by the DHCP server. Devices can suggest addresses, but the DHCP server decides. Did the lease of the 10.10.0.232 address...
2HELPFULS
Forums/
Deco
2023-09-01 14:00:43
@Sandy1 Sometimes, when a device is not compatible with the wifi security protocol used by the access point (Deco), it states "invalid password". Are the affected devices recent enough?
0HELPFULS
Forums/
Deco
2023-08-30 13:08:23
@usafret05 The main Deco must be cable connected to the modem. The other Deco can be connected either by cable or by wifi to the main Deco.
1HELPFULS
Forums/
Deco
2023-08-27 13:24:39
I believe it will work. The X20 will see that as an Ethernet backhaul, hence I expect they will stop using wifi(s) as backhaul. The P9 are, apparently, using simultaneously CPL and wifi(s) as...
2HELPFULS