Forums/
Deco
2024-05-19 16:21:03
@marmardes The fifth one can be added to the mesh via wifi, and will extend the wifi network. You never setup individual Deco as AP, you configure the Operation Mode of the whole mesh to "Router" or...
0HELPFULS
Forums/
Deco
2024-05-19 16:00:15
@marmardes I assume the existing four Deco are configured together as a single mesh, and the mesh is configured as an Access Point. You can add the fifth Deco to the mesh. You can connect it by cable...
0HELPFULS
Forums/
Deco
2024-05-18 05:10:05
@SDGTR The satellite is "connected" to the main via the three wifi networks, it detected that the main is reachabe via the three networks, and is using all three as backhaul. So it's, indeed,...
0HELPFULS
Forums/
Deco
2024-05-18 04:57:16
@Vibes0227 I wanted to know if the modem was still in use, or if it had been replaced by the Deco. As the modem is still in use, I suggest setting the Operation Mode of the Deco to "Access Point".
0HELPFULS
Forums/
Deco
2024-05-17 16:38:34
@Vibes0227 Are the Deco connected to the modem? If yes, it is perhaps better to use the Deco in AP mode (at least to test).
0HELPFULS
Forums/
Deco
2024-05-17 13:37:02
@Vibes0227 Was it previously working via the modem you are using? Are you running your Deco in Router or in AP mode?
0HELPFULS