Forums/
Deco
2024-01-02 17:39:40
\> This is a known limitation of the Deco's if the WAN connection stops the whole device goes offline, searching for the WAN signal ie No LAN connectivity, no DHCP No dns etc. - \> brain dead, but a...
1HELPFULS
Forums/
Deco
2024-01-02 09:45:18
@yves_b \> My assumption: \> From what I read, the main suspect is your 10 GBit switch. \> Could it start acting as a DHCP server when it detects it is isolated from Internet? \> Or, after a loss of...
0HELPFULS
Forums/
Deco
2024-01-01 02:21:32
@yves_b \> In the "advanced" setting in the app, you can see if the Operation Mode of the Deco mesh is Router or AP. Of course it's Router. \> You have switches as well in your configuration, how are...
0HELPFULS
Forums/
Deco
2023-12-31 13:14:13
@yves_b \> Is the Deco configured to operate in Router or in AP mode? It's a mesh with 3 devices, the main one is connected to the cable modem. The entire network has its own IP range, etc. One...
0HELPFULS
Forums/
Deco
2023-12-31 11:33:12
@yves_b The current traffic, going to/from (through) the cable modem, or rather through the gateway to/from the internet. In other words, the traffic between the LAN, including all clients, and...
0HELPFULS
Forums/
Deco
2023-12-31 11:25:31
@yves_b Last time I was up at night and noticed, that the cable modem after some period of time without internet connection started rebooting again and again. The reboot was running until the...
0HELPFULS
