Forums/
Deco
2024-10-19 02:01:17
@Lgilibert It's either the XE75 or XE75 pro Look at the back of the unit if it was a 2.5 Gig port then its the XE75 Pro
2HELPFULS
Forums/
Deco
2024-10-18 21:34:45
@ChanceIll Did they recommend switching the second unit to serve as the main unit? If the second unit has the OFDMA/MU-MIMO capability, then designating it as the primary unit should enable this...
0HELPFULS
Forums/
Deco
2024-10-17 22:05:15
@rjvader In that case please open up a ticket with support to see if they can help you restore your firmware to an earlier version.
0HELPFULS
Forums/
Deco
2024-10-17 21:40:17
@rjvader Have you considered rolling back your firmware using the web interface? If not, I recommend starting there. Click the link below and look for the section "Instructions for Reverting Your...
0HELPFULS
Forums/
Deco
2024-10-17 21:30:59
@Sdaniel105 The most effective solution would be to connect an Ethernet cable between the two buildings. If that is not feasible, you might consider using an additional Deco unit or a range extender....
0HELPFULS
Forums/
Deco
2024-10-17 21:10:33
@nightpier I recommend first changing the SSID (network name) of the guest network. After that, please enable the IoT network and assign it the same SSID and password as the guest network. For...
1HELPFULS