Forums/
Wi-Fi Routers
2020-01-30 18:19:19
@johntech Hi John, Yes this is possible. follow the number steps below to change your subnet. Keep in mind with 192.168.0.1/255 you have 254 possible address that can be asigned. By default your DHCP...
0HELPFULS
Forums/
Wi-Fi Routers
2020-01-30 18:12:22
@djviko Thank you for sharing. Can you share a bit more information so i can forward this to the sorftware team? They will need to know roughly how many devices you have on each band, Your ISP and...
0HELPFULS
Forums/
Wi-Fi Routers
2020-01-30 17:53:13
@Karabash The Clients MAC IDs change as they are transmitted by the RE450. The Last 3 octets remain that of the device, but the 1st 3 are changed to the Header from the Range Extender. This due to...
0HELPFULS
Forums/
Wi-Fi Routers
2020-01-30 17:48:55
@ErickLennon2020 The Channel width on the 5GHz follows the same priciple the further away from the router the lower the width the closer devices will be the bigger the width. A good way to think...
1HELPFULS
Forums/
Wi-Fi Routers
2020-01-30 17:42:15
@Agie826 The Archer C9 V1 cannot opperate as a VPN server or Client. It can however pass through VPN traffic that is IPsec, PPTP or L2TP based. You would simply need to run the VPN software from your...
0HELPFULS
Forums/
Wi-Fi Routers
2020-01-30 01:43:37
@ErickLennon2020 Port negotiation depends on the adapters on both ends and the cable. Make sure your PC has a gigabit ethernet card and the cable is at least a Cat 5e. For the bandwidth for 2.4 it...
1HELPFULS