Forums/
Wi-Fi Routers
2020-02-20 00:02:54
@ali1560 You should be able to find it by going to Advanced Setup > NAT > Virtual Server:
0HELPFULS
Forums/
Powerline Adapters
2020-02-19 23:35:27
@mike1000 Check the link rates of your connected devices to make sure neither are showing 100 Mbps. Another thing to try are different outlets as what may seem close might involve multiple circuits...
0HELPFULS
Forums/
Range Extenders
2020-02-19 23:23:27
@HH70 There is no way to directly adjust it, the time will be what the time zone is set to. If it is incorrect, reboot the RE450 or unplug it and plug it back in. What should happen is once the RE450...
0HELPFULS
Forums/
Adapters
2020-02-19 23:17:21
Re:Which tp-link device(s) can connect a USB printer to the network for connecting to it via TCP/IP?
@IngAjVillalon We did have two print servers, the model you mentioned and the TL-PS510U, but both of those are end of life so they are not being manufactured anymore as well. If you happend to come...
0HELPFULS
Forums/
Wi-Fi Routers
2020-02-19 22:46:03
MrAndyGets wrote @Tony You're awesome. I did as you said. And it works. Thank you for your help... @MrAndyGets Perfect! Glad to help.
0HELPFULS
Forums/
Powerline Adapters
2020-02-14 18:58:12
@CaribConsult I checked with one of our testers and you can measure the noise with a Oscilloscope which is not cheap. A alternative is to use the powerline utliity app, and monitor the link rates, if...
0HELPFULS