@duckware Thank you for reaching out to us and welcome to the TP-Link community. I would like to escalate this case to our support engineers, they would like to help investigate further. Please check...

@Judge_Dredd3D AX55 doesn't support Onemesh when it is working in AP mode, nor does it support Onemesh when connecting to another Onemesh router. You can refer to the following FAQ to find more...

@Rick37 The 2.5Gbps Ethernet port either connects to the internet modem as WAN or connects to the client device as LAN. There is only 1 2.5Gbps port.

Hello @Masamune Do you modify any special or advanced settings on the AX11000? If we want to confirm if there are settings on the AX11000 that affect the speed, we could do the following test: 1) In...

@stryker291982 Is your network diagram as follows? AX21 ))) ((( RE600X ))) ((( RE600X In a Onemesh system, the Onemesh extender will select the best source unit to connect to automatically, which...

@TangO.o Thank you for getting back. As you can see that both Eric and Ryan fixed their 2.4G issue by modifying the 2.4G channel (they both chose channel 4), you can give it a go, you may try channel...